Manpages

USLCOM(4) BSD Kernel Interfaces Manual USLCOM(4)

NAME

uslcom — Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105 based USB serial adapter

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

device usb
device ucom
device uslcom

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

uslcom_load="YES"

DESCRIPTION

The uslcom driver supports Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105 based USB serial adapters.

HARDWARE

The following devices should work with the uslcom driver:

AC-Services CAN, CIS-IBUS, IBUS and OBD interfaces

Aerocomm Radio

AKTACOM ACE-1001 cable

AMBER Wireless AMB2560

Arkham DS-101 Adapter

Argussoft ISP

Arygon Technologies Mifare RFID Reader

AVIT Research USB-TTL interface

B&G H3000 Data Cable

Balluff RFID reader

Baltech card reader

BEI USB VCP Sensor

Burnside Telecom Desktop Mobile

chip45.com Crumb128 module

Clipsal 5000CT2, 5500PACA, 5500PCU, 560884, 5800PC, C5000CT2 and L51xx C-Bus Home Automation products

Commander 2 EDGE(GSM) Modem

Cygnal Fasttrax GPS and Debug adapter

DataApex MultiCOM USB to RS232 converter

Degree Controls USB adapter

DekTec DTA Plus VHF/UHF Booster

Dell DW700 GPS Receiver

Digianswer ZigBee/802.15.4 MAC

Dynastream ANT Development kits

Elan USBcount50, USBscope50, USBpulse100 and USBwave12

ELV USB-I2C interface

EMS C1007 HF RFID controller

Festo CPX-USB and CMSP interfaces

Gemalto Prox-PU/CU contactless card reader

Helicomm IP-Link 1220-DVM

IMS USB-RS422 adapter

Infinity GPS-MIC-1 Radio Monophone

INSYS Modem

IRZ SG-10 and MC35pu GSM/GPRS Modems

Jablotron PC-60B

Kamstrup M-Bus Master MultiPort 250D and Optical Eye/3 wire utility meter interfaces

Kyocera GPS

Link Instruments MS-019 and MS-028 Oscilloscope/Logic Analyzer/Pattern Generators

Lipowsky Baby-JTAG, Baby-LIN and HARP-1

MEI CashFlow SC and Series 2000 cash acceptors

MJS USB-TOSLINK Adapter

MobiData GPRS USB Modems

MSD DashHawk

Multiplex RC adapter

Optris MSpro LT Thermometer

Owen AC4 USB-RS485 converter

Pirelli DP-L10 SIP phone

PLX CA-42 Phone cable

Pololu USB to Serial

Procyon AVS Mind Machine

Renesas RX-Stick for RX610

Siemens MC60 Cable

Silicon Laboratories generic CP2101/CP2102/CP2103/CP2104/CP2105 chips

Software Bisque Paramount ME

SPORTident BSM7-D USB

Suunto Sports Instrument

Syntech CipherLab USB Barcode Scanner

T-Com TC 300 SIP phone

Tams Master Easy Control

Telegesis ETRX2USB

Timewave HamLinkUSB

Tracient RFID Reader

Track Systems Traqmate

Vaisala USB Instrument cable

VStabi Controller

WAGO 750-923 USB Service Cable

WaveSense Jazz Blood Glucose Meter

WIENER Plein & Baus CML Data Logger, RCM Remote, and PL512 and MPOD PSUs

WMR RIGblaster Plug&Play and RIGtalk RT1

Zephyr Bioharness

FILES
/dev/ttyU*

for callin ports

/dev/ttyU*.init
/dev/ttyU*.lock

corresponding callin initial-state and lock-state devices

/dev/cuaU*

for callout ports

/dev/cuaU*.init
/dev/cuaU*.lock

corresponding callout initial-state and lock-state devices

SEE ALSO

tty(4), ucom(4), usb(4)

HISTORY

The uslcom device driver first appeared in OpenBSD 4.0. The first FreeBSD release to include it was FreeBSD 7.1.

AUTHORS

The uslcom driver was written by Jonathan Gray <jsg [AT] openbsd.org>.

BSD April 26, 2017 BSD