NAME
uplcom — USB support for Prolific PL-2303/2303X/2303HX serial adapters driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device usb
device ucom
device uplcom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
uplcom_load="YES"
DESCRIPTION
The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The uplcom driver supports the following devices and adapters:
•
ADLINK ND-6530 USB-Serial Adapter
•
Alcatel One Touch 535/735 Phone
•
Alcor AU9720 USB-RS232 Serial Adapter
•
AlDiga AL-11U Modem
•
Alltronix ACM003U00 Modem
•
Anchor Serial adapter
•
ATEN UC-232A
•
BAFO BF-800 and BF-810
•
Belkin F5U257
•
BenQ S81 Phone
•
Corega CG-USBRS232R Serial Adapter
•
Cressi Edy (Seiko) Diving Computer
•
ELECOM UC-SGT Serial Adapter
•
HAL Corporation Crossam2+USB IR commander
•
Hama USB RS-232 Serial Adapter
•
Hamlet exaggerate XURS232
•
HP LD220 Point-Of-Sale (POS) Display
•
IOGEAR UC-232A
•
I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5
•
iTegno WM1080A GSM/GFPRS Modem
•
iTegno WM2080A CDMA Modem
•
Leadtek 9531 GPS
•
Micromax 610U Modem
•
Microsoft Palm 700WX
•
Mobile Action MA-620 Infrared Adapter
•
Motorola Cables
•
Nokia CA-42 Cable
•
OTI DKU-5 cable
•
Panasonic TY-TP50P6-S flat screen
•
PLX CA-42 Phone Cable
•
PLANEX USB-RS232 URS-03
•
Prolific Generic USB-Serial Adapters
•
Prolific Pharos USB-Serial Adapter
•
RATOC REX-USB60
•
Radio Shack USB Serial Cable
•
Sagem USB-Serial Adapter
•
Samsung I330 Phone Cradle
•
Sandberg USB to Serial Link (model number 133-08)
•
Sanwa KB-USB2 Multimeter cable
•
Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones
•
Sitecom USB-Serial Adapter
•
SMART Technologies USB-Serial Adapter
•
Sony QN3 Phone Cable
•
Sony Ericsson Datapilot
•
Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables
•
SOURCENEXT KeikaiDenwa 8 (with and without charger)
•
Speed Dragon USB-Serial Cable
•
Syntech CPT-8001C Barcode Scanner
•
TDK UHA6400 and UPA9664 USB-PHS Adapters
•
TRENDnet USB to Serial Converter (TU-S9)
•
Tripp-Lite U209-000-R USB-Serial Adapter
•
UIC HCR331 Magnetic Stripe Card Reader
•
UIC MSR206 Magnetic Stripe Card Reader
•
Willcom W-SIM DD PHS terminal.(WS002IN)
•
YC-Cable USB-Serial Adapter
•
Zeagle N2iTion3 Diving Computer
SYSCTL VARIABLES
The following variables are available as both sysctl(8) variables and loader(8) tunables:
hw.usb.uplcom.debug
Debug output level, where 0 is debugging disabled and larger values increase debug message verbosity. Default is 0.
FILES
/dev/ttyU*
for callin ports
/dev/ttyU*.init
/dev/ttyU*.lock
corresponding callin initial-state and lock-state devices
/dev/cuaU*
for callout ports
/dev/cuaU*.init
/dev/cuaU*.lock
corresponding callout initial-state and lock-state devices
SEE ALSO
HISTORY
The uplcom driver appeared in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes [AT] FreeBSD.org> in April 2002.
BSD April 24, 2018 BSD