Manpages

NAME

sq pki - Authenticate certs using the Web of Trust

SYNOPSIS

sq pki authenticate [OPTIONS] FINGERPRINT|KEYID USERID
sq pki lookup [OPTIONS] USERID
sq pki identify [OPTIONS] FINGERPRINT|KEYID
sq pki certify [OPTIONS] CERTIFIER-KEY KEY_ID|FINGERPRINT|FILE USERID
sq pki link [OPTIONS] SUBCOMMAND
sq pki list [OPTIONS] PATTERN
sq pki path [OPTIONS] FINGERPRINT|KEYID USERID

DESCRIPTION

Authenticate certs using the Web of Trust.

The "Web of Trust" is a decentralized trust model popularized by PGP. It is a superset of X.509, which is a hierarchical trust model, and is the most popular trust model on the public internet today. As used on the public internet, however, X.509 relies on a handful of global certification authorities (CAs) who often undermine its security.

The Web of Trust is more nuanced than X.509. Using the Web of Trust, require multiple, independent paths to authenticate a binding by only partially trusting CAs. This prevents a single bad actor from compromising their security. And those who have stronger security requirements can use the Web of Trust in a completely decentralized manner where only the individuals they select – who are not necessarily institutions – act as trusted introducers.

SUBCOMMANDS

sq pki authenticate
Authenticate a binding.

Authenticate a binding (a certificate and User ID) by looking for a path from the trust roots to the specified binding in the Web of Trust. Because certifications may express uncertainty (i.e., certifications may be marked as conveying only partial or marginal trust), multiple paths may be needed.

If a binding could be authenticated to the specified level (by default: fully authenticated, i.e., a trust amount of 120), then the exit status is 0. Otherwise the exit status is 1.

If any valid paths to the binding are found, they are printed on stdout whether they are sufficient to authenticate the binding or not.

sq pki lookup
Lookup the certificates associated with a User ID.

Identifies authenticated bindings (User ID and certificate pairs) where the User ID matches the specified User ID.

If a binding could be authenticated to the specified level (by default: fully authenticated, i.e., a trust amount of 120), then the exit status is 0. Otherwise the exit status is 1.

If a binding could be partially authenticated (i.e., its trust amount is greater than 0), then the binding is displayed, even if the trust is below the specified threshold.

sq pki identify
Identify a certificate.

Identify a certificate by finding authenticated bindings (User ID and certificate pairs).

If a binding could be authenticated to the specified level (by default: fully authenticated, i.e., a trust amount of 120), then the exit status is 0. Otherwise the exit status is 1.

If a binding could be partially authenticated (i.e., its trust amount is greater than 0), then the binding is displayed, even if the trust is below the specified threshold.

sq pki certify
Certify a User ID for a Certificate.

Using a certification a keyholder may vouch for the fact that another certificate legitimately belongs to a user id. In the context of emails this means that the same entity controls the key and the email address. These kind of certifications form the basis for the Web of Trust.

This command emits the certificate with the new certification. The updated certificate has to be distributed, preferably by sending it to the certificate holder for attestation. See also ’sq key attest-certifications’.

By default a certification expires after 5 years. Using the ’--expiry’ argument specific validity periods may be defined. It allows for providing a point in time for validity to end or a validity duration.

’sq pki certify’ respects the reference time set by the top-level ’--time’ argument. It sets the certification’s creation time to the reference time.

sq pki link
Manage authenticated certificate and User ID links.

Link a certificate and User ID is one way of making ’sq’ consider a binding to be authentic. Another way is to use ’sq pki certify’ to certify the binding with an explicitly configured trust root. The linking functionality is often easier to work with, and the information is private by default.

Authenticated bindings can be used to designate a certificate using a symbolic name. For instance, using ’sq encrypt’’s ’--recipient-userid’ and ’--recipient-email’ options, a user can designate a certificate using a User ID or an email address that is authenticated for that certificate.

’sq’ also uses authenticated certificates to authenticate other data. For instance, ’sq verify’ considers signatures made by an authenticated certificate to be authentic.

Users can create a link using ’sq pki link add’. That link can later be retracted using ’sq pki link retract’. A certificate can also be accepted as a trusted introducer by passing the ’--ca’ option to ’sq pki link add’.

’sq’ implements linking using non-exportable certifications, and an implicit trust root. An OpenPGP certificate directory, the default certificate store used by ’sq’, includes a local trust root, which is stored under the ’trust-root’ special name. When the user instructs ’sq’ to accept a binding, ’sq’ uses the local trust root to create a non-exportable certification, which it stores in the certificate directory. In this way, operations that use the Web of Trust to authenticate a binding automatically use links.

When a user retracts a link, ’sq’ creates a new, non-exportable certification with zero trust. This certification suppresses the previous link.

sq pki list
List all authenticated bindings (User ID and certificate pairs).

Only bindings that meet the specified trust amount (by default bindings that are fully authenticated, i.e., have a trust amount of 120), are shown.

Even if no bindings are shown, the exit status is 0.

If ’--email’ is provided, then a pattern matches if it is a case insensitive substring of the email address as-is or the normalized email address. Note: unlike the email address, the pattern is not normalized. In particular, puny code normalization is not done on the pattern.

sq pki path
Verify the specified path.

A path is a sequence of certificates starting at the root, and a User ID. This function checks that each path segment has a valid certification, which also satisfies any constraints (trust amount, trust depth, regular expressions).

If a valid path is not found, then this subcommand also lints the path. In particular, it report if any certifications are insufficient, e.g., not enough trust depth, or invalid, e.g., because they use SHA-1, but the use of SHA-1 has been disabled.

EXAMPLES

sq pki authenticate
Authenticate a specific binding.

sq pki authenticate EB28F26E2739A4870ECC47726F0073F60FD0CBF0 \

"Alice <alice [AT] example.org>"

Check whether we can authenticate any user ID with the specified email address for the given certificate.

sq pki authenticate EB28F26E2739A4870ECC47726F0073F60FD0CBF0 \

--email alice [AT] example.org

sq pki lookup
Lookup certificates that can be authenticated for the given user ID.

sq pki lookup "Alice <alice [AT] example.org>"

Lookup certificates that have a user ID with the specified email address, and that user ID can be authenticated.

sq pki lookup --email alice [AT] example.org

sq pki identify
Identify the user IDs that can be authenticated for the certificate.

sq pki identify EB28F26E2739A4870ECC47726F0073F60FD0CBF0

List all user IDs that have that have been certified by anyone.

sq pki identify --gossip \

511257EBBF077B7AEDAE5D093F68CB84CE537C9A

sq pki certify
Juliet certifies that Romeo controls romeo.pgp and romeo [AT] example.org

sq pki certify juliet.pgp romeo.pgp ’<romeo [AT] example.org>’

Certify the User ID Ada, and set the certification time to July 21, 2013 at midnight UTC:

sq pki certify --time 20130721 neal.pgp ada.pgp Ada

sq pki list
List all bindings for user IDs containing an email address from example.org, and that can be authenticated.

sq pki list @example.org

sq pki path
Verify that Alice ceritified a particular User ID for Bob’s certificate.

sq pki path EB28F26E2739A4870ECC47726F0073F60FD0CBF0 \

511257EBBF077B7AEDAE5D093F68CB84CE537C9A \
"Bob <bob [AT] example.org>"

SEE ALSO

sq(1), sq-pki-authenticate(1), sq-pki-lookup(1), sq-pki-identify(1), sq-pki-certify(1), sq-pki-link(1), sq-pki-list(1), sq-pki-path(1).

For the full documentation see <https://book.sequoia-pgp.org>;.

VERSION

0.34.0 (sequoia-openpgp 1.19.0)