NAME
scan - a program to produce channel.conf files.
SYNOPSIS
scan [options]
DESCRIPTION
This manual page documents briefly the scan commands.
scan is a program to produce channels.conf files.
OPTIONS
-c |
[initial-tuning-data-file] |
scan on currently tuned transponder only
-v |
verbose (repeat for more) | ||
-q |
quiet (repeat for less) | ||
-a N |
use DVB /dev/dvb/adapterN/ | ||
-f N |
use DVB /dev/dvb/adapter?/frontendN | ||
-d N |
use DVB /dev/dvb/adapter?/demuxN | ||
-s N |
use DiSEqC switch position N (DVB-S only) | ||
-i N |
spectral inversion setting (0: off, 1: on, 2: auto [default]) | ||
-n |
evaluate NIT-other for full network scan (slow!) | ||
-5 |
multiply all filter timeouts by factor 5 for non-DVB-compliant section repitition rates | ||
-o fmt |
output format: ’zap’ (default), ’vdr’ or ’pids’ (default with -c) | ||
-x N |
Conditional Access, (default -1) N=0 gets only FTA channels N=-1 gets all channels N=xxx sets ca field in vdr output to :xxx: | ||
-t N |
Service select, Combined bitfield parameter. 1 = TV, 2 = Radio, 4 = Other, (default 7) | ||
-p |
for vdr output format: dump provider name | ||
-e N |
VDR version, default 3 for VDR-1.3.x and newer value 2 sets NIT and TID to zero Vdr version 1.3.x and up implies -p. | ||
-l |
lnb-type (DVB-S Only) (use -l help to print types) or | ||
-l |
low[,high[,switch]] in Mhz | ||
-u |
UK DVB-T Freeview channel numbering for VDR | ||
-P |
do not use ATSC PSIP tables for scanning (but only PAT and PMT) (applies for ATSC only) | ||
-A N |
check for ATSC 1=Terrestrial [default], 2=Cable or 3=both | ||
-U |
Uniquely name unknown services |
This manual page was written by Uwe Bugla <uwe.bugla [AT] gmx.de>.