Manpages

名 前

guestfs-hacking - extending and contributing to libguestfs

説 明

This manual page is for hackers who want to extend libguestfs itself.

THE SOURCE CODE

Libguestfs source is located in the github repository https://github.com/libguestfs/libguestfs

Large amounts of boilerplate code in libguestfs (RPC, bindings, documentation) are generated. This means that many source files will appear to be missing from a straightforward git checkout. You have to run the generator ("./configure && make -C generator") in order to create those files.

Libguestfs uses an autotools-based build system, with the main files being configure.ac and Makefile.am. See "THE BUILD SYSTEM".

The generator subdirectory contains the generator, plus files describing the API. The lib subdirectory contains source for the library. The appliance and daemon subdirectories contain the source for the code that builds the appliance, and the code that runs in the appliance respectively. Other directories are covered in the section "SOURCE CODE SUBDIRECTORIES" below.

Apart from the fact that all API entry points go via some generated code, the library is straightforward. (In fact, even the generated code is designed to be readable, and should be read as ordinary code). Some actions run entirely in the library, and are written as C functions in files under lib. Others are forwarded to the daemon where (after some generated RPC marshalling) they appear as C functions in files under daemon.

To build from source, first read the guestfs-building(1). ソ ー ス コ ー ド の サ ブ デ ィ レ ク ト リ ー
There are a lot of subdirectories in the source tree! Which ones should you concentrate on first? lib and daemon which contain the source code of the core library. generator is the code generator described above, so that is important. The Makefile.am in the root directory will tell you in which order the subdirectories get built. And then if you are looking at a particular tool (eg. customize) or language binding (eg. python), go straight to that subdirectory, but remember that if you didn’t run the generator yet, then you may find files which appear to be missing.
align

virt-alignment-scan(1) の コ マ ン ド お よ び ド キ ュ メ ン ト 。

appliance

libguestfs ア プ ラ イ ア ン ス 、 ス ク リ プ ト な ど を 構 築 し ま す 。

bash

Bash tab-completion scripts.

build-aux

autotools に よ り 使 用 さ れ る さ ま ざ ま な ビ ル ド ス ク リ プ ト 。

builder

virt-builder(1) コ マ ン ド お よ び ド キ ュ メ ン ト 。

common

Various libraries of internal code can be found in the common subdirectory:
common/edit

Common code for interactively and non-interactively editing files within a libguestfs filesystem.

common/errnostring

The communication protocol used between the library and the daemon running inside the appliance has to encode errnos as strings, which is handled by this library.

common/mlcustomize

Library code associated with "virt-customize" but also used in other tools.

common/mlgettext

Small, generated wrapper which allows libguestfs to be compiled with or without ocaml-gettext. This is generated by ./configure.

common/mlpcre

Lightweight OCaml bindings for Perl Compatible Regular Expressions (PCRE). Note this is not related in any way to Markus Mottl’s ocaml-pcre library.

common/mlprogress

OCaml bindings for the progress bar functions (see common/progress).

common/mlstdutils

A library of pure OCaml utility functions used in many places.

common/mltools

OCaml utility functions only used by the OCaml virt tools (like "virt-sysprep", "virt-customize" etc.)

common/mlutils

OCaml bindings for C functions in "common/utils", and some POSIX bindings which are missing from the OCaml stdlib.

common/mlvisit

OCaml bindings for the visit functions (see common/visit).

common/mlxml

OCaml bindings for the libxml2 library.

common/options

Common options parsing for guestfish, guestmount and some virt tools.

common/parallel

A framework used for processing multiple libvirt domains in parallel.

common/progress

Common code for printing progress bars.

common/protocol

The XDR-based communication protocol used between the library and the daemon running inside the appliance is defined here.

common/qemuopts

Mini-library for writing qemu command lines and qemu config files.

common/structs

Common code for printing and freeing libguestfs structs, used by the library and some tools.

common/utils

Various utility functions used throughout the library and tools.

common/visit

Recursively visit a guestfs filesystem hierarchy.

common/windows

Utility functions for handling Windows drive letters.

contrib 外 部 の 貢 献 、 実 験 的 な 部 分 で す 。
customize

virt-customize(1) command and documentation.

daemon

libguestfs ア プ ラ イ ア ン ス の 中 で 実 行 さ れ 、 ア ク シ ョ ン を 実 行 し て い る デ ー モ ン 。

diff

virt-diff(1) command and documentation.

docs

Miscellaneous manual pages.

edit

virt-edit(1) の コ マ ン ド お よ び ド キ ュ メ ン ト 。

examples

C API の コ ー ド 例 。

fish

guestfish(1) コ マ ン ド ラ イ ン シ ェ ル 、 お よ び virt-copy-in(1), virt-copy-out(1), virt-tar-in(1), virt-tar-out(1) の よ う な さ ま ざ ま な シ ェ ル ス ク リ プ ト 。

format

virt-format(1) の コ マ ン ド お よ び ド キ ュ メ ン ト 。

fuse

guestmount(1), libguestfs の 上 に 組 み 立 て ら れ た FUSE (ユ ー ザ ー 空 間 フ ァ イ ル シ ス テ ム )。

generator

The crucially important generator, used to automatically generate large amounts of boilerplate C code for things like RPC and bindings.

get-kernel

virt-get-kernel(1) command and documentation.

inspector

virt-inspector(1), 仮 想 マ シ ン イ メ ー ジ 検 査 ツ ー ル 。

logo

Logo used on the website. The fish is called Arthur by the way.

make-fs

virt-make-fs(1) command and documentation.

po-docs

The build infrastructure and PO files for translations of manpages and POD files. Eventually this will be combined with the po directory, but that is rather complicated.

rescue

virt-rescue(1) の コ マ ン ド お よ び ド キ ュ メ ン ト 。

resize

virt-resize(1) の コ マ ン ド お よ び ド キ ュ メ ン ト 。

sparsify

virt-sparsify(1) の コ マ ン ド お よ び ド キ ュ メ ン ト 。

sysprep

virt-sysprep(1) コ マ ン ド お よ び ド キ ュ メ ン ト 。

tests テ ス ト し ま す 。
test-data

Files and other test data used by the tests.

test-tool エ ン ド ユ ー ザ ー が QEMU/カ ー ネ ル の 組 み 合 わ せ が libguestfs で 動 作 す る か ど う か を 確 認 す る た め の テ ス ト ツ ー ル で す 。

tools

Perl で 書 か れ た コ マ ン ド ラ イ ン ツ ー ル (virt-win-reg(1) お よ び 他 の 多 く の も の )。

utils

Miscellaneous utilities, such as "boot-benchmark".

website

The http://libguestfs.org website files.

csharp
erlang
gobject
golang
haskell
java

ocaml

perl
python
ruby 言 語 バ イ ン デ ィ ン グ 。

THE BUILD SYSTEM
Libguestfs uses the GNU autotools build system (autoconf, automake, libtool).

The ./configure script is generated from configure.ac and m4/guestfs-*.m4. Most of the configure script is split over many m4 macro files by topic, for example m4/guestfs-daemon.m4 deals with the dependencies of the daemon.

The job of the top level Makefile.am is mainly to list the subdirectories ("SUBDIRS") in the order they should be compiled.

common-rules.mk is included in every Makefile.am (top level and subdirectories). subdir-rules.mk is included only in subdirectory Makefile.am files.

There are many make targets. Use this command to list them all:

make help

EXTENDING LIBGUESTFS

ADDING A NEW API
Because large amounts of boilerplate code in libguestfs are generated, this makes it easy to extend the libguestfs API.

To add a new API action there are two changes:

There are two sorts of API action, depending on whether the call goes through to the daemon in the appliance, or is serviced entirely by the library (see "ARCHITECTURE" in guestfs-internals(1)). "guestfs_sync" in guestfs(3) is an example of the former, since the sync is done in the appliance. "guestfs_set_trace" in guestfs(3) is an example of the latter, since a trace flag is maintained in the handle and all tracing is done on the library side.

Most new actions are of the first type, and get added to the "daemon_functions" list. Each function has a unique procedure number used in the RPC protocol which is assigned to that action when we publish libguestfs and cannot be reused. Take the latest procedure number and increment it.

For library-only actions of the second type, add to the "non_daemon_functions" list. Since these functions are serviced by the library and do not travel over the RPC mechanism to the daemon, these functions do not need a procedure number, and so the procedure number is set to -1.

For daemon actions, implement the function "do_<name>" in the "daemon/" directory.

For library actions, implement the function "guestfs_impl_<name>" in the "lib/" directory.

In either case, use another function as an example of what to do.

こ れ ら の 変 更 を し た 後 、 コ ン パ イ ル す る た め に "make" を 使 用 し て く だ さ い 。

Note that you don’t need to implement the RPC, language bindings, manual pages or anything else. It’s all automatically generated from the OCaml description.

Adding tests for an API

You can supply zero or as many tests as you want per API call. The tests can either be added as part of the API description (generator/actions_*.ml), or in some rarer cases you may want to drop a script into "tests/*/". Note that adding a script to "tests/*/" is slower, so if possible use the first method.

The following describes the test environment used when you add an API test in actions_*.ml. テ ス ト 環 境 は 4 個 の ブ ロ ッ ク デ バ イ ス を 持 ち ま す :
/dev/sda 2 GB テ ス ト 用 の 一 般 的 な ブ ロ ッ ク デ バ イ ス 。
/dev/sdb 2 GB

/dev/sdb1 is an ext2 filesystem used for testing filesystem write operations.

/dev/sdc 10 MB

2 つ の ブ ロ ッ ク デ バ イ ス が 必 要 と な る い く つ か の テ ス ト に お い て 使 用 さ れ ま す 。

/dev/sdd

ISO with fixed content (see images/test.iso).

To be able to run the tests in a reasonable amount of time, the libguestfs appliance and block devices are reused between tests. So don’t try testing "guestfs_kill_subprocess" in guestfs(3) :-x

Each test starts with an initial scenario, selected using one of the "Init*" expressions, described in generator/types.ml. These initialize the disks mentioned above in a particular way as documented in types.ml. You should not assume anything about the previous contents of other disks that are not initialized.

You can add a prerequisite clause to any individual test. This is a run-time check, which, if it fails, causes the test to be skipped. Useful if testing a command which might not work on all variations of libguestfs builds. A test that has prerequisite of "Always" means to run unconditionally.

In addition, packagers can skip individual tests by setting environment variables before running "make check".

SKIP_TEST_<CMD>_<NUM>=1

eg: "SKIP_TEST_COMMAND_3=1" skips test #3 of "guestfs_command" in guestfs(3). ま た は :

SKIP_TEST_<CMD>=1

eg: "SKIP_TEST_ZEROFREE=1" skips all "guestfs_zerofree" in guestfs(3) tests.

Packagers can run only certain tests by setting for example:

TEST_ONLY="vfs_type zerofree"

See tests/c-api/tests.c for more details of how these environment variables work.

Debugging new APIs

Test new actions work before submitting them. 新 し い コ マ ン ド を 試 す た め に guestfish を 使 う こ と が で き ま す 。

Debugging the daemon is a problem because it runs inside a minimal environment. However you can fprintf messages in the daemon to stderr, and they will show up if you use "guestfish -v".

ADDING A NEW LANGUAGE BINDING
All language bindings must be generated by the generator (see the generator subdirectory).

There is no documentation for this yet. We suggest you look at an existing binding, eg. generator/ocaml.ml or generator/perl.ml.

Adding tests for language bindings

Language bindings should come with tests. Previously testing of language bindings was rather ad-hoc, but we have been trying to formalize the set of tests that every language binding should use.

Currently only the OCaml and Perl bindings actually implement the full set of tests, and the OCaml bindings are canonical, so you should emulate what the OCaml tests do.

This is the numbering scheme used by the tests:

- 000+ basic tests:
010 load the library
020 create
030 create-flags
040 create multiple handles
050 test setting and getting config properties
060 explicit close
065 implicit close (in GC'd languages)
070 optargs
080 version
090 retvalues
- 100 launch, create partitions and LVs and filesystems
- 400+ events:
410 close event
420 log messages
430 progress messages
- 800+ regression tests (specific to the language)
- 900+ any other custom tests for the language

To save time when running the tests, only 100, 430, 800+, 900+ should launch the handle.

FORMATTING CODE
Our C source code generally adheres to some basic code-formatting conventions. The existing code base is not totally consistent on this front, but we do prefer that contributed code be formatted similarly. In short, use spaces-not-TABs for indentation, use 2 spaces for each indentation level, and other than that, follow the K&R style.

If you use Emacs, add the following to one of your start-up files (e.g., ~/.emacs), to help ensure that you get indentation right: ;;; In libguestfs, indent with spaces everywhere (not TABs). ;;;
Exceptions: Makefile and ChangeLog modes.
(add-hook 'find-file-hook
'(lambda () (if (and buffer-file-name
(string-match "/libguestfs\\>"
(buffer-file-name))
(not (string-equal mode-name "Change Log"))
(not (string-equal mode-name "Makefile")))
(setq indent-tabs-mode nil)))) ;;;
When editing C sources in libguestfs, use this style.
(defun libguestfs-c-mode ()
"C mode with adjusted defaults for use with libguestfs."
(interactive)
(c-set-style "K&R")
(setq c-indent-level 2)
(setq c-basic-offset 2))
(add-hook 'c-mode-hook
'(lambda () (if (string-match "/libguestfs\\>"
(buffer-file-name))
(libguestfs-c-mode)))) 変 更 の テ ス ト 方 法
Turn warnings into errors when developing to make warnings hard to ignore:

./configure --enable-werror 有 用 な タ ー ゲ ッ ト は 次 の と お り で す :
"make check" 一 般 的 な テ ス ト 群 を 実 行 し ま す 。

This is implemented using the regular automake "TESTS" target. See the automake documentation for details.

"make check-valgrind"

valgrind に あ る テ ス ト 群 の サ ブ セ ッ ト を 実 行 し ま す 。

See "VALGRIND" below.

"make check-valgrind-local-guests" ロ ー カ ル に イ ン ス ト ー ル さ れ た libvirt 仮 想 マ シ ン (読 み 込 み 専 用 ) を 使 用 し て 、 valgrind に あ る テ ス ト 群 の サ ブ セ ッ ト を 実 行 し ま す 。
"make check-direct"

Runs all tests using default appliance back-end. This only has any effect if a non-default backend was selected using "./configure --with-default-backend=..."

"make check-valgrind-direct"

Run a subset of the test suite under valgrind using the default appliance back-end.

"make check-with-upstream-qemu"

Runs all tests using a local qemu binary. It looks for the qemu binary in QEMUDIR (defaults to $HOME/d/qemu), but you can set this to another directory on the command line, eg:

make check-with-upstream-qemu QEMUDIR=/usr/src/qemu

"make check-with-upstream-libvirt"

Runs all tests using a local libvirt. This only has any effect if the libvirt backend was selected using "./configure --with-default-backend=libvirt"

It looks for libvirt in LIBVIRTDIR (defaults to $HOME/d/libvirt), but you can set this to another directory on the command line, eg:

make check-with-upstream-libvirt LIBVIRTDIR=/usr/src/libvirt

"make check-slow"

Runs some slow/long-running tests which are not run by default.

To mark a test as slow/long-running:

check-slow:
$(MAKE) check TESTS="$(SLOW_TESTS)" SLOW=1

"sudo make check-root"

Runs some tests which require root privileges. These are supposed to be safe, but take care. You have to run this as root (eg. using sudo(8) explicitly).

To mark a test as requiring root:

check-root:
$(MAKE) check TESTS="$(ROOT_TESTS)"

"make check-all"

Equivalent to running all "make check*" rules except "check-root".

"make check-release"

Runs a subset of "make check*" rules that are required to pass before a tarball can be released. Currently this is:

"make installcheck"

Run "make check" on the installed copy of libguestfs.

The version of installed libguestfs being tested, and the version of the libguestfs source tree must be the same.

Do:

./configure
make clean ||:
make
make installcheck

VALGRIND
When you do "make check-valgrind", it searches for any Makefile.am in the tree that has a "check-valgrind:" target and runs it.

Writing the Makefile.am and tests correctly to use valgrind and working with automake parallel tests is subtle.

If your tests are run via a shell script wrapper, then in the wrapper use:

$VG virt-foo

and in the Makefile.am use:

check-valgrind:
make VG="@VG@" check

However, if your binaries run directly from the "TESTS" rule, you have to modify the Makefile.am like this:

LOG_COMPILER = $(VG)
check-valgrind:
make VG="@VG@" check

In either case, check that the right program is being tested by examining the tmp/valgrind* log files carefully.

SUBMITTING PATCHES
Submit patches to the mailing list: https://lists.libguestfs.org and CC to rjones [AT] redhat.com.

You do not need to subscribe to the mailing list if you don’t want to. There may be a short delay while your message is moderated. 国 際 化 (i18n) サ ポ ー ト
We support i18n (gettext anyhow) in the library.

However many messages come from the daemon, and we don’t translate those at the moment. One reason is that the appliance generally has all locale files removed from it, because they take up a lot of space. So we’d have to readd some of those, as well as copying our PO files into the appliance.

Debugging messages are never translated, since they are intended for the programmers.

MISCELLANEOUS TOPICS

HOW OCAML PROGRAMS ARE COMPILED AND LINKED
Mostly this section is "how we make automake & ocamlopt work together" since OCaml programs themselves are easy to compile.

Automake has no native support for OCaml programs, ocamlc nor ocamlopt. What we do instead is to treat OCaml programs as C programs which happen to contain these "other objects" ("DEPENDENCIES" in automake-speak) that happen to be the OCaml objects. This works because OCaml programs usually have C files for native bindings etc.

So a typical program is described as just its C sources:

virt_customize_SOURCES = ... crypt-c.c perl_edit-c.c

For programs that have no explicit C sources, we create an empty dummy.c file, and list that instead:

virt_resize_SOURCES = dummy.c

The OCaml objects which contain most of the code are listed as automake dependencies (other dependencies may also be listed):

virt_customize_DEPENDENCIES = ... customize_main.cmx

The only other special thing we need to do is to provide a custom link command. This is needed because automake won’t assemble the ocamlopt command, the list of objects and the "-cclib" libraries in the correct order otherwise.

virt_customize_LINK = \
$(top_builddir)/ocaml-link.sh -cclib '-lutils' -- ...

The actual rules, which you can examine in customize/Makefile.am, are a little bit more complicated than this because they have to handle:

These are now kept in subdir-rules.mk at the top level, which is included in every subdirectory Makefile.am.

Automake isn’t aware of the complete list of sources for a binary, so it will not add them all automatically.

MAINTAINER TASKS

MAINTAINER MAKEFILE TARGETS
These "make" targets probably won’t work and aren’t useful unless you are a libguestfs maintainer.

make maintainer-commit

This commits everything in the working directory with the commit message "Version $(VERSION).". You must update configure.ac, clean and rebuild first.

make maintainer-tag

This tags the current HEAD commit with the tag "v$(VERSION)" and one of the messages:

Version $(VERSION) stable
Version $(VERSION) development

(See "LIBGUESTFS VERSION NUMBERS" in guestfs(3) for the difference between a stable and development release.)

make maintainer-check-authors

Check that all authors (found in git commit messages) are included in the generator/authors.ml file.

make maintainer-check-extra-dist

This rule must be run after "make dist" (so there is a tarball in the working directory). It compares the contents of the tarball with the contents of git to ensure that no files have been missed from Makefile.am "EXTRA_DIST" rules.

make maintainer-upload-website

This is used by the software used to automate libguestfs releases to copy the libguestfs website to another git repository before it is uploaded to the web server.

MAKING A STABLE RELEASE
When we make a stable release, there are several steps documented here. See "LIBGUESTFS VERSION NUMBERS" in guestfs(3) for general information about the stable branch policy.

Fedora (x86-64)
Debian (x86-64)
Ubuntu (x86-64)
Fedora (aarch64)
Fedora (ppc64)
Fedora (ppc64le)

./localconfigure
make distclean -k
./localconfigure
make && make dist
make maintainer-commit
make maintainer-tag

git branch stable-1.XX
git push origin stable-1.XX

INTERNAL DOCUMENTATION

This section documents internal functions inside libguestfs and various utilities. It is intended for libguestfs developers only.

This section is autogenerated from "/**" comments in source files, which are marked up in POD format.

These functions are not publicly exported, and may change or be removed at any time.

__INTERNAL_DOCUMENTATION__

関 連 項 目

guestfs(3), guestfs-building(1), guestfs-examples(3), guestfs-internals(1), guestfs-performance(1), guestfs-release-notes(1), guestfs-testing(1), libguestfs-test-tool(1), libguestfs-make-fixed-appliance(1), http://libguestfs.org/.

著 者

Richard W.M. Jones ("rjones at redhat dot com")

COPYRIGHT

Copyright (C) 2009-2023 Red Hat Inc.

LICENSE

BUGS

To get a list of bugs against libguestfs, use this link: https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

To report a new bug against libguestfs, use this link: https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

When reporting a bug, please supply: