Manpages

NAME

fs_setacl - Sets the ACL for a directory

SYNOPSIS

fs setacl -dir <directory>+ -acl <access list entries>+
[-clear] [-negative] [-id] [-if] [-help]

fs sa -d <directory>+ -a <access list entries>+
[-c] [-n] [-id] [-if] [-h]

fs seta -d <directory>+ -a <access list entries>+
[-c] [-n] [-id] [-if] [-h]

DESCRIPTION

The fs setacl command adds the access control list ( ACL ) entries specified with the -acl argument to the ACL of each directory named by the -dir argument.

If the -dir argument designates a pathname in DFS filespace (accessed via the AFS/DFS Migration Toolkit Protocol Translator), it can be a file as well as a directory. The ACL must already include an entry for "mask_obj", however.

Only user and group entries are acceptable values for the -acl argument. Do not place machine entries ( IP addresses) directly on an ACL ; instead, make the machine entry a group member and place the group on the ACL.

To completely erase the existing ACL before adding the new entries, provide the -clear flag. To add the specified entries to the "Negative rights" section of the ACL (deny rights to specified users or groups), provide the -negative flag.

To display an ACL, use the fs listacl command. To copy an ACL from one directory to another, use the fs copyacl command.

CAUTIONS

If the ACL already grants certain permissions to a user or group, the permissions specified with the fs setacl command replace the existing permissions, rather than being added to them.

Setting negative permissions is generally unnecessary and not recommended. Simply omitting a user or group from the "Normal rights" section of the ACL is normally adequate to prevent access. In particular, note that it is futile to deny permissions that are granted to members of the system:anyuser group on the same ACL ; the user needs only to issue the unlog command to receive the denied permissions.

When including the -clear option, be sure to reinstate an entry for each directory’s owner that includes at least the "l" (lookup) permission. Without that permission, it is impossible to resolve the "dot" (".") and "dot dot" ("..") shorthand from within the directory. (The directory’s owner does implicitly have the "a" (administer) permission even on a cleared ACL, but must know to use it to add other permissions.)

OPTIONS

-dir <directory>+

Names each AFS directory, or DFS directory or file, for which the set the ACL. Partial pathnames are interpreted relative to the current working directory.

Specify the read/write path to each directory (or DFS file), to avoid the failure that results from attempting to change a read-only volume. By convention, the read/write path is indicated by placing a period before the cell name at the pathname’s second level (for example, /afs/.example.com). For further discussion of the concept of read/write and read-only paths through the filespace, see the fs mkmount reference page.

-acl <access list entries>+

Defines a list of one or more ACL entries, each a pair that names:

in that order, separated by a space (thus every instance of this argument has two parts). The accepted AFS abbreviations and shorthand words, and the meaning of each, are as follows:
a (administer)

Change the entries on the ACL.

d (delete)

Remove files and subdirectories from the directory or move them to other directories.

i (insert)

Add files or subdirectories to the directory by copying, moving or creating.

k (lock)

Set read locks or write locks on the files in the directory.

l (lookup)

List the files and subdirectories in the directory, stat the directory itself, and issue the fs listacl command to examine the directory’s ACL.

r (read)

Read the contents of files in the directory; issue the "ls -l" command to stat the elements in the directory.

w (write)

Modify the contents of files in the directory, and issue the UNIX chmod command to change their mode bits.

A, B, C, D, E, F, G, H

Have no default meaning to the AFS server processes, but are made available for applications to use in controlling access to the directory’s contents in additional ways. The letters must be uppercase.

none

No permissions. Removes the user/group from the ACL, but does not guarantee they have no permissions if they belong to groups that remain on the ACL.

read

Equals the "r" (read) and "l" (lookup) permissions.

write

Equals all permissions except "a" (administer), that is, "rlidwk".

It is acceptable to mix entries that combine the individual letters with entries that use the shorthand words, but not use both types of notation within an individual pairing of user or group and permissions.

Granting the "l" (lookup) and "i" (insert) permissions without granting the "w" (write) and/or "r" (read) permissions is a special case, and grants rights approrpriate for "dropbox" directories. See the " DROPBOXES" section for details.

If setting ACLs on a pathname in DFS filespace, see the DFS documentation for the proper format and acceptable values for DFS ACL entries.

-clear

Removes all existing entries on each ACL before adding the entries specified with the -acl argument.

-negative

Places the specified ACL entries in the "Negative rights" section of each ACL, explicitly denying the rights to the user or group, even if entries on the accompanying "Normal rights" section of the ACL grant them permissions.

This argument is not supported for DFS files or directories, because DFS does not implement negative ACL permissions.

-help

Prints the online help for this command. All other valid options are ignored.

DROPBOXES

If an accessing user has the "l" (lookup) and "i" (insert) permissions on a directory, but not the "w" (write) and/or "r" (read) permissions, the user is implicitly granted the ability to write and/or read any file they create in that directory, until they close the file. This is to allow "dropbox"-style directories to exist, where users can deposit files, but cannot modify them later nor can they modify or read any files deposited in the directory by other users.

Note, however, that the dropbox functionality is not perfect. The fileserver does not have knowledge of when a file is opened or closed on the client, and so the fileserver always allows an accessing user to read or write to a file in a "dropbox" directory if they own the file. While the client prevents the user from reading or modifying their deposited file later, this is not enforced on the fileserver, and so should not be relied on for security.

Additionally, if "dropbox" permissions are granted to "system:anyuser", unauthenticated users may deposit files in the directory. If an unauthenticated user deposits a file in the directory, the new file will be owned by the unauthenticated user ID, and is thus potentially modifiable by anyone.

In an effort to try and reduce accidentally publicizing private data, the fileserver may refuse read requests for "dropbox" files from unauthenticated users. As a result, depositing files as an unauthenticated user may arbitrarily fail if "system:anyuser" has been granted dropbox permissions. While this should be rare, it is not completely preventable, and so for this reason relying on unauthenticated users to be able to deposit files in a dropbox is NOT RECOMMENDED .

EXAMPLES

The following example adds two entries to the "Normal rights" section of the current working directory’s ACL: the first entry grants "r" (read) and "l" (lookup) permissions to the group pat:friends, while the other (using the "write" shorthand) gives all permissions except "a" (administer) to the user "smith".

% fs setacl -dir . -acl pat:friends rl smith write
% fs listacl -path .
Access list for . is
Normal rights:
pat:friends rl
smith rlidwk

The following example includes the -clear flag, which removes the existing permissions (as displayed with the fs listacl command) from the current working directory’s reports subdirectory and replaces them with a new set.

% fs listacl -dir reports
Access list for reports is
Normal rights:
system:authuser rl
pat:friends rlid
smith rlidwk
pat rlidwka
Negative rights:
terry rl
% fs setacl -clear -dir reports -acl pat all smith write system:anyuser rl
% fs listacl -dir reports
Access list for reports is
Normal rights:
system:anyuser rl
smith rlidwk
pat rlidwka

The following example use the -dir and -acl switches because it sets the ACL for more than one directory (both the current working directory and its public subdirectory).

% fs setacl -dir . public -acl pat:friends rli
% fs listacl -path . public
Access list for . is
Normal rights:
pat rlidwka
pat:friends rli
Access list for public is
Normal rights:
pat rlidwka
pat:friends rli

The following example demonstrates the use of the + and - options to modfiy ACLs relative to the existing set

% fs setacl dir . -acl pat:friends r-
% fs listacl -path .
Access list for . is
Normal rights:
pat rlidwka
pat:friends li
% fs setacl dir . acl pat:friends w+
% fs listacl -path .
Access list for . is
Normal rights:
pat rlidwka
pat:friends wli

PRIVILEGE REQUIRED

The issuer must have the "a" (administer) permission on the directory’s ACL, a member of the system:administrators group, or, as a special case, must be the UID owner of the top-level directory of the volume containing this directory. The last provision allows the UID owner of a volume to repair accidental ACL errors without requiring intervention by a member of system:administrators.

Earlier versions of OpenAFS also extended implicit administer permission to the owner of any directory. In current versions of OpenAFS, only the owner of the top-level directory of the volume has this special permission.

SEE ALSO

fs_copyacl(1), fs_listacl(1), fs_mkmount(1)

COPYRIGHT

IBM Corporation 2000. <http://www.ibm.com/>; All Rights Reserved.

This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.