NAME
fpit − Fujitsu Stylistic input driver
SYNOPSIS
Section
"InputDevice"
Identifier "idevname"
Driver "fpit"
Option "Device" "devpath"
...
EndSection
DESCRIPTION
fpit is an Xorg input driver for Fujitsu Stylistic Tablet PCs.
The fpit driver functions as a pointer input device, and may be used as the X server’s core pointer.
SUPPORTED HARDWARE
This driver supports the touchscreen of the Stylistic LT and (with special options) of the Stylistic 500, 1000 and 2300.
Under Linux the
Fujitsus serial port is not, by default, detected. Therefore
the following must be added to one of your start-up scripts.
(Either one of the X scripts, or to rc.local or similar).
setserial /dev/ttyS3 autoconfig
setserial /dev/ttyS3 IRQ 15 baud_base 115200 port
0xfce8
This driver now
supports Stylistic 3400 (and possibly other passive-pen
systems) with a special "Passive" paramter.
Try this serial configuration for the 3400:
setserial /dev/ttyS3 autoconfig
setserial /dev/ttyS3 uart 16450 irq 5 port 0xfd68
CONFIGURATION DETAILS
Please refer to xorg.conf(5x) for general configuration details and for options that can be used with all input drivers. This section only covers configuration details specific to this driver.
The device supports the following options:
Option "MaximumXPosition" "number"
Sets the maximum X position, use this to calibrate your touchscreen’s right hand edge.
Option "MinimumXPosition" "number"
Sets the minimum X position, use this to calibrate your touchscreen’s left hand edge.
Option
"MaximumYPosition" "number"
Option "MinimumYPosition"
"number"
Same as for X axis, but for Y axis.
Option
"InvertX"
Option "InvertY"
Invert the specified axis.
Option "SwapXY"
Swap the X and Y axis.
Option "Rotate" "CW"
Option "Rotate" "CWW" Manipulate the invert and swap options to match screen rotations.
Option "DeviceName" "name"
Option "DeviceName" "name" sets the name of the X device.
Option "AlwaysCore" "on"
enables the sharing of the core pointer. When this feature is enabled, the device will take control of the core pointer (and thus will emit core events) and at the same time will be able, when asked so, to report extended events. You can use the last available integer feedback to control this feature. When the value of the feedback is zero, the feature is disabled. The feature is enabled for any other value.
Option "DebugLevel" number
sets the level of debugging info reported.
Option "BaudRate" "38400", "19200" or "9600" (default)
changes the serial link speed.
Option "Passive"
decodes the passive pen.
Example, for
Stylistic LT setup is:
Section "InputDevice"
Identifier "mouse0"
Driver "fpit"
Option "Device"
"/dev/ttyS3"
EndSection
And for other
Stylistic devices try:
Section "InputDevice"
Identifier "mouse0"
Driver "fpit"
Option "Device"
"/dev/ttyS3"
Option "BaudRate" "19200"
Option "MaximumXPosition"
"6250"
Option "MaximumYPosition"
"4950"
Option "MinimumXPosition"
"130"
Option "MinimumYPosition"
"0"
Option "InvertY"
EndSection
For Stylistic
3400:
Section "InputDevice"
Identifier "mouse0"
Driver "fpit"
Option "Device"
"/dev/ttyS3"
Option "BaudRate" "9600"
Option "MaximumXPosition"
"4070"
Option "MaximumYPosition"
"4020"
Option "MinimumXPosition"
"0"
Option "MinimumYPosition"
"0"
Option "Passive"
Option "SendCoreEvents"
EndSection
SEE ALSO
Xorg(1x), xorg.conf(5x), xorgconfig(1x), Xserver(1x), X(7).
AUTHORS
Original FPIT port: Rob Tsuk <rob [AT] tsuk.com> and John Apfelbaum <johnapf [AT] linuxslate.com>
X4 Port: Richard Miller-Smith <richard.miller-smith [AT] philips.com>, based on Elographics code from: Patrick Lecoanet
X4.2 Cleanup: Alan Cox