Manpages

−fugly-comma

In an external-procedure invocation, treat a trailing comma in the argument list as specification of a trailing null argument, and treat an empty argument list as specification of a single null argument.

For example, CALL FOO(,) is treated as CALL FOO(%VAL(0), %VAL(0)). That is, two null arguments are specified by the procedure call when −fugly-comma is in force. And F = FUNC() is treated as F = FUNC(%VAL(0)).

The default behavior, −fno-ugly-comma, is to ignore a single trailing comma in an argument list. So, by default, CALL FOO(X,) is treated exactly the same as CALL FOO(X).

−fugly-complex

Do not complain about REAL(expr) or AIMAG(expr) when expr is a "COMPLEX" type other than "COMPLEX(KIND=1)"−−−usually this is used to permit "COMPLEX(KIND=2)" ("DOUBLE COMPLEX") operands.

The −ff90 option controls the interpretation of this construct.

−fno-ugly-init

Disallow use of Hollerith and typeless constants as initial values (in "PARAMETER" and "DATA" statements), and use of character constants to initialize numeric types and vice versa.

For example, DATA I/’F’/, CHRVAR/65/ , J/4HABCD/ is disallowed by −fno-ugly-init.

−fugly-logint

Treat "INTEGER" and "LOGICAL" variables and expressions as potential stand-ins for each other.

For example, automatic conversion between "INTEGER" and "LOGICAL" is enabled, for many contexts, via this option.

−fonetrip

Executable iterative "DO" loops are to be executed at least once each time they are reached.

ANSI FORTRAN 77 and more recent versions of the Fortran standard specify that the body of an iterative "DO" loop is not executed if the number of iterations calculated from the parameters of the loop is less than 1. (For example, DO 10 I = 1, 0.) Such a loop is called a zero-trip loop.

Prior to ANSI FORTRAN 77, many compilers implemented "DO" loops such that the body of a loop would be executed at least once, even if the iteration count was zero. Fortran code written assuming this behavior is said to require one-trip loops. For example, some code written to the FORTRAN 66 standard expects this behavior from its "DO" loops, although that standard did not specify this behavior.

The −fonetrip option specifies that the source file(s) being compiled require one-trip loops.

This option affects only those loops specified by the (iterative) "DO" statement and by implied-"DO" lists in I/O statements. Loops specified by implied-"DO" lists in "DATA" and specification (non-executable) statements are not affected.

−ftypeless-boz

Specifies that prefix-radix non-decimal constants, such as Z’ ABCD ’, are typeless instead of "INTEGER(KIND=1)".

You can test for yourself whether a particular compiler treats the prefix form as "INTEGER(KIND=1)" or typeless by running the following program:

        EQUIVALENCE (I, R)
        R = Z’ABCD1234’
        J = Z’ABCD1234’
        IF (J .EQ. I) PRINT *, ’Prefix form is TYPELESS’
        IF (J .NE. I) PRINT *, ’Prefix form is INTEGER’
        END

Reports indicate that many compilers process this form as "INTEGER(KIND=1)", though a few as typeless, and at least one based on a command-line option specifying some kind of compatibility.

−fintrin-case-initcap
−fintrin-case-upper
−fintrin-case-lower
−fintrin-case-any

Specify expected case for intrinsic names. −fintrin-case-lower is the default.

−fmatch-case-initcap
−fmatch-case-upper
−fmatch-case-lower
−fmatch-case-any

Specify expected case for keywords. −fmatch-case-lower is the default.

−fsource-case-upper
−fsource-case-lower
−fsource-case-preserve

Specify whether source text other than character and Hollerith constants is to be translated to uppercase, to lowercase, or preserved as is. −fsource-case-lower is the default.

−fsymbol-case-initcap
−fsymbol-case-upper
−fsymbol-case-lower
−fsymbol-case-any

Specify valid cases for user-defined symbol names. −fsymbol-case-any is the default.

−fcase-strict-upper

Same as −fintrin-case-upper −fmatch-case-upper −fsource-case-preserve −fsymbol-case-upper. (Requires all pertinent source to be in uppercase.)

−fcase-strict-lower

Same as −fintrin-case-lower −fmatch-case-lower −fsource-case-preserve −fsymbol-case-lower. (Requires all pertinent source to be in lowercase.)

−fcase-initcap

Same as −fintrin-case-initcap −fmatch-case-initcap −fsource-case-preserve −fsymbol-case-initcap. (Requires all pertinent source to be in initial capitals, as in Print *,SqRt(Value).)

−fcase-upper

Same as −fintrin-case-any −fmatch-case-any −fsource-case-upper −fsymbol-case-any. (Maps all pertinent source to uppercase.)

−fcase-lower

Same as −fintrin-case-any −fmatch-case-any −fsource-case-lower −fsymbol-case-any. (Maps all pertinent source to lowercase.)

−fcase-preserve

Same as −fintrin-case-any −fmatch-case-any −fsource-case-preserve −fsymbol-case-any. (Preserves all case in user-defined symbols, while allowing any-case matching of intrinsics and keywords. For example, call Foo(i,I) would pass two different variables named i and I to a procedure named Foo.)

−fbadu77−intrinsics-delete
−fbadu77−intrinsics-hide
−fbadu77−intrinsics-disable
−fbadu77−intrinsics-enable

Specify status of UNIX intrinsics having inappropriate forms. −fbadu77−intrinsics-enable is the default.

−ff2c-intrinsics-delete
−ff2c-intrinsics-hide
−ff2c-intrinsics-disable
−ff2c-intrinsics-enable

Specify status of f2c-specific intrinsics. −ff2c-intrinsics-enable is the default.

−ff90−intrinsics-delete
−ff90−intrinsics-hide
−ff90−intrinsics-disable
−ff90−intrinsics-enable

Specify status of F90−specific intrinsics. −ff90−intrinsics-enable is the default.

−fgnu-intrinsics-delete
−fgnu-intrinsics-hide
−fgnu-intrinsics-disable
−fgnu-intrinsics-enable

Specify status of Digital’s COMPLEX-related intrinsics. −fgnu-intrinsics-enable is the default.

−fmil-intrinsics-delete
−fmil-intrinsics-hide
−fmil-intrinsics-disable
−fmil-intrinsics-enable

Specify status of MIL-STD-1753−specific intrinsics. −fmil-intrinsics-enable is the default.

−funix-intrinsics-delete
−funix-intrinsics-hide
−funix-intrinsics-disable
−funix-intrinsics-enable

Specify status of UNIX intrinsics. −funix-intrinsics-enable is the default.

−fvxt-intrinsics-delete
−fvxt-intrinsics-hide
−fvxt-intrinsics-disable
−fvxt-intrinsics-enable

Specify status of VXT intrinsics. −fvxt-intrinsics-enable is the default.

−ffixed-line-length-n

Set column after which characters are ignored in typical fixed-form lines in the source file, and through which spaces are assumed (as if padded to that length) after the ends of short fixed-form lines.

Popular values for n include 72 (the standard and the default), 80 (card image), and 132 (corresponds to ’’extended-source’’ options in some popular compilers). n may be none, meaning that the entire line is meaningful and that continued character constants never have implicit spaces appended to them to fill out the line. −ffixed-line-length-0 means the same thing as −ffixed-line-length-none.

Options to Request or Suppress Warnings

Warnings are diagnostic messages that report constructions which are not inherently erroneous but which are risky or suggest there might have been an error.

You can request many specific warnings with options beginning −W, for example −Wimplicit to request warnings on implicit declarations. Each of these specific warning options also has a negative form beginning −Wno- to turn off warnings; for example, −Wno-implicit. This manual lists only one of the two forms, whichever is not the default.

These options control the amount and kinds of warnings produced by GNU Fortran:
−fsyntax-only

Check the code for syntax errors, but don’t do anything beyond that.

−pedantic

Issue warnings for uses of extensions to ANSI FORTRAN 77. −pedantic also applies to C-language constructs where they occur in GNU Fortran source files, such as use of \e in a character constant within a directive like #include.

Valid ANSI FORTRAN 77 programs should compile properly with or without this option. However, without this option, certain GNU extensions and traditional Fortran features are supported as well. With this option, many of them are rejected.

Some users try to use −pedantic to check programs for strict ANSI conformance. They soon find that it does not do quite what they want−−−it finds some non-ANSI practices, but not all. However, improvements to g77 in this area are welcome.

−pedantic-errors

Like −pedantic, except that errors are produced rather than warnings.

−fpedantic

Like −pedantic, but applies only to Fortran constructs.

−Wno-globals

Inhibit warnings about use of a name as both a global name (a subroutine, function, or block data program unit, or a common block) and implicitly as the name of an intrinsic in a source file.

Also inhibit warnings about inconsistent invocations and/or definitions of global procedures (function and subroutines). Such inconsistencies include different numbers of arguments and different types of arguments.

−Wimplicit

Warn whenever a variable, array, or function is implicitly declared. Has an effect similar to using the "IMPLICIT NONE" statement in every program unit. (Some Fortran compilers provide this feature by an option named −u or /WARNINGS=DECLARATIONS.)

−Wunused

Warn whenever a variable is unused aside from its declaration.

−Wuninitialized

Warn whenever an automatic variable is used without first being initialized.

These warnings are possible only in optimizing compilation, because they require data-flow information that is computed only when optimizing. If you don’t specify −O, you simply won’t get these warnings.

These warnings occur only for variables that are candidates for register allocation. Therefore, they do not occur for a variable whose address is taken, or whose size is other than 1, 2, 4 or 8 bytes. Also, they do not occur for arrays, even when they are in registers.

Note that there might be no warning about a variable that is used only to compute a value that itself is never used, because such computations may be deleted by data-flow analysis before the warnings are printed.

These warnings are made optional because GNU Fortran is not smart enough to see all the reasons why the code might be correct despite appearing to have an error. Here is one example of how this can happen:

        SUBROUTINE DISPAT(J)
        IF (J.EQ.1) I=1
        IF (J.EQ.2) I=4
        IF (J.EQ.3) I=5
        CALL FOO(I)
        END

If the value of "J" is always 1, 2 or 3, then "I" is always initialized, but GNU Fortran doesn’t know this. Here is another common case:

        SUBROUTINE MAYBE(FLAG)
        LOGICAL FLAG
        IF (FLAG) VALUE = 9.4
        ...
        IF (FLAG) PRINT *, VALUE
        END

This has no bug because "VALUE" is used only if it is set.

−Wall

The −Wunused and −Wuninitialized options combined. These are all the options which pertain to usage that we recommend avoiding and that we believe is easy to avoid. (As more warnings are added to g77 some might be added to the list enabled by −Wall.)

The remaining −W... options are not implied by −Wall because they warn about constructions that we consider reasonable to use, on occasion, in clean programs.
−Wsurprising

Warn about ’’suspicious’’ constructs that are interpreted by the compiler in a way that might well be surprising to someone reading the code. These differences can result in subtle, compiler-dependent (even machine-dependent) behavioral differences. The constructs warned about include:

A revealing example is the constant expression 2**−2*1., which g77 evaluates to .25, while others might evaluate it to 0., the difference resulting from the way precedence affects type promotion.

(The −fpedantic option also warns about expressions having two arithmetic operators in a row.)

An example of an expression producing different results in a surprising way is −I*S, where I holds the value −2147483648 and S holds 0.5. On many systems, negating I results in the same value, not a positive number, because it is already the lower bound of what an "INTEGER(KIND=1)" variable can hold. So, the expression evaluates to a positive number, while the ’’expected’’ interpretation, (−I)*S, would evaluate to a negative number.

Even cases such as −I*J produce warnings, even though, in most configurations and situations, there is no computational difference between the results of the two interpretations−−−the purpose of this warning is to warn about differing interpretations and encourage a better style of coding, not to identify only those places where bugs might exist in the user’s code.

−Werror

Make all warnings into errors.

’’Extra warnings’’ are issued for:

Some of these have no effect when compiling programs written in Fortran:
−Wcomment
−Wformat
−Wparentheses
−Wswitch
−Wtraditional
−Wshadow
−Wid-clash-len
−Wlarger-than-len
−Wconversion
−Waggregate-return
−Wredundant-decls

These options all could have some relevant meaning for GNU Fortran programs, but are not yet supported.

Options for Debugging Your Program or GNU Fortran

GNU Fortran has various special options that are used for debugging either your program or g77

A sample debugging session looks like this (note the use of the breakpoint):

        $ cat gdb.f
              PROGRAM PROG
              DIMENSION A(10)
              DATA A /1.,2.,3.,4.,5.,6.,7.,8.,9.,10./
              A(5) = 4.
              PRINT*,A
              END
        $ g77 -g -O gdb.f
        $ gdb a.out
        ...
        (gdb) break MAIN__
        Breakpoint 1 at 0x8048e96: file gdb.f, line 4.
        (gdb) run
        Starting program: /home/toon/g77-bugs/./a.out
        Breakpoint 1, MAIN__ () at gdb.f:4
        4             A(5) = 4.
        Current language:  auto; currently fortran
        (gdb) print a(5)
        $1 = 5
        (gdb) step
        5             PRINT*,A
        (gdb) print a(5)
        $2 = 4
        ...

One could also add the setting of the breakpoint and the first run command to the file .gdbinit in the current directory, to simplify the debugging session.

Options That Control Optimization

Most Fortran users will want to use no optimization when developing and testing programs, and use −O or −O2 when compiling programs for late-cycle testing and for production use. However, note that certain diagnostics−−−such as for uninitialized variables−−−depend on the flow analysis done by −O, i.e. you must use −O or −O2 to get such diagnostics.

The following flags have particular applicability when compiling Fortran programs:
−malign-double

(Intel x86 architecture only.)

Noticeably improves performance of g77 programs making heavy use of "REAL(KIND=2)" ("DOUBLE PRECISION") data on some systems. In particular, systems using Pentium, Pentium Pro, 586, and 686 implementations of the i386 architecture execute programs faster when "REAL(KIND=2)" ("DOUBLE PRECISION") data are aligned on 64−bit boundaries in memory.

This option can, at least, make benchmark results more consistent across various system configurations, versions of the program, and data sets.

Note: The warning in the gcc documentation about this option does not apply, generally speaking, to Fortran code compiled by g77

Also also note: The negative form of −malign-double is −mno-align-double, not −benign-double.

−ffloat-store

Might help a Fortran program that depends on exact IEEE conformance on some machines, but might slow down a program that doesn’t.

This option is effective when the floating-point unit is set to work in IEEE 854 ’extended precision’−−−as it typically is on x86 and m68k GNU systems−−−rather than IEEE 754 double precision. −ffloat-store tries to remove the extra precision by spilling data from floating-point registers into memory and this typically involves a big performance hit. However, it doesn’t affect intermediate results, so that it is only partially effective. ’Excess precision’ is avoided in code like:

        a = b + c
        d = a * e

but not in code like:

              d = (b + c) * e

For another, potentially better, way of controlling the precision, see @ref{Floating-point precision}.

−fforce-mem
−fforce-addr

Might improve optimization of loops.

−fno-inline

Don’t compile statement functions inline. Might reduce the size of a program unit−−−which might be at expense of some speed (though it should compile faster). Note that if you are not optimizing, no functions can be expanded inline.

−ffast-math

Might allow some programs designed to not be too dependent on IEEE behavior for floating-point to run faster, or die trying. Sets −funsafe-math-optimizations, and −fno-trapping-math.

−funsafe-math-optimizations

Allow optimizations that may be give incorrect results for certain IEEE inputs.

−fno-trapping-math

Allow the compiler to assume that floating-point arithmetic will not generate traps on any inputs. This is useful, for example, when running a program using IEEE "non-stop" floating-point arithmetic.

−fstrength-reduce

Might make some loops run faster.

−frerun-cse-after-loop
−fexpensive-optimizations
−fdelayed-branch
−fschedule-insns
−fschedule-insns2
−fcaller-saves

Might improve performance on some code.

−funroll-loops

Typically improves performance on code using iterative "DO" loops by unrolling them and is probably generally appropriate for Fortran, though it is not turned on at any optimization level. Note that outer loop unrolling isn’t done specifically; decisions about whether to unroll a loop are made on the basis of its instruction count.

Also, no ’loop discovery’[1] is done, so only loops written with "DO" benefit from loop optimizations, including−−−but not limited to−−−unrolling. Loops written with "IF" and "GOTO" are not currently recognized as such. This option unrolls only iterative "DO" loops, not "DO WHILE" loops.

−funroll-all-loops

Probably improves performance on code using "DO WHILE" loops by unrolling them in addition to iterative "DO" loops. In the absence of "DO WHILE", this option is equivalent to −funroll-loops but possibly slower.

−fno-move-all-movables
−fno-reduce-all-givs
−fno-rerun-loop-opt

In general, the optimizations enabled with these options will lead to faster code being generated by GNU Fortran; hence they are enabled by default when issuing the g77 command.

−fmove-all-movables and −freduce-all-givs will enable loop optimization to move all loop-invariant index computations in nested loops over multi-rank array dummy arguments out of these loops.

−frerun-loop-opt will move offset calculations resulting from the fact that Fortran arrays by default have a lower bound of 1 out of the loops.

These three options are intended to be removed someday, once loop optimization is sufficiently advanced to perform all those transformations without help from these options.

Options Controlling the Preprocessor

These options control the C preprocessor, which is run on each C source file before actual compilation.

Some of these options also affect how g77 processes the "INCLUDE" directive. Since this directive is processed even when preprocessing is not requested, it is not described in this section.

However, the "INCLUDE" directive does not apply preprocessing to the contents of the included file itself.

Therefore, any file that contains preprocessor directives (such as "#include", "#define", and "#if") must be included via the "#include" directive, not via the "INCLUDE" directive. Therefore, any file containing preprocessor directives, if included, is necessarily included by a file that itself contains preprocessor directives.

Options for Directory Search

These options affect how the cpp preprocessor searches for files specified via the "#include" directive. Therefore, when compiling Fortran programs, they are meaningful when the preprocessor is used.

Some of these options also affect how g77 searches for files specified via the "INCLUDE" directive, although files included by that directive are not, themselves, preprocessed. These options are:

−Idir

These affect interpretation of the "INCLUDE" directive (as well as of the "#include" directive of the cpp preprocessor).

Note that −Idir must be specified without any spaces between −I and the directory name−−−that is, −Ifoo/bar is valid, but −I foo/bar is rejected by the g77 compiler (though the preprocessor supports the latter form). Also note that the general behavior of −I and "INCLUDE" is pretty much the same as of −I with "#include" in the cpp preprocessor, with regard to looking for header.gcc files and other such things.

Options for Code Generation Conventions

These machine-independent options control the interface conventions used in code generation.

Most of them have both positive and negative forms; the negative form of −ffoo would be −fno-foo. In the table below, only one of the forms is listed−−−the one which is not the default. You can figure out the other form by either removing no- or adding it.
−fno-automatic

Treat each program unit as if the "SAVE" statement was specified for every local variable and array referenced in it. Does not affect common blocks. (Some Fortran compilers provide this option under the name −static.)

−finit-local-zero

Specify that variables and arrays that are local to a program unit (not in a common block and not passed as an argument) are to be initialized to binary zeros.

Since there is a run-time penalty for initialization of variables that are not given the "SAVE" attribute, it might be a good idea to also use −fno-automatic with −finit-local-zero.

−fno-f2c

Do not generate code designed to be compatible with code generated by f2c use the GNU calling conventions instead.

The f2c calling conventions require functions that return type "REAL(KIND=1)" to actually return the C type "double", and functions that return type "COMPLEX" to return the values via an extra argument in the calling sequence that points to where to store the return value. Under the GNU calling conventions, such functions simply return their results as they would in GNU C−−-"REAL(KIND=1)" functions return the C type "float", and "COMPLEX" functions return the GNU C type "complex" (or its "struct" equivalent).

This does not affect the generation of code that interfaces with the "libg2c" library.

However, because the "libg2c" library uses f2c calling conventions, g77 rejects attempts to pass intrinsics implemented by routines in this library as actual arguments when −fno-f2c is used, to avoid bugs when they are actually called by code expecting the GNU calling conventions to work.

For example, INTRINSIC ABS ;CALL FOO( ABS ) is rejected when −fno-f2c is in force. (Future versions of the g77 run-time library might offer routines that provide GNU-callable versions of the routines that implement the f2c intrinsics that may be passed as actual arguments, so that valid programs need not be rejected when −fno-f2c is used.)

Caution: If −fno-f2c is used when compiling any source file used in a program, it must be used when compiling all Fortran source files used in that program.

−ff2c-library

Specify that use of "libg2c" (or the original "libf2c") is required. This is the default for the current version of g77

Currently it is not valid to specify −fno-f2c-library. This option is provided so users can specify it in shell scripts that build programs and libraries that require the "libf2c" library, even when being compiled by future versions of g77 that might otherwise default to generating code for an incompatible library.

−fno-underscoring

Do not transform names of entities specified in the Fortran source file by appending underscores to them.

With −funderscoring in effect, g77 appends two underscores to names with underscores and one underscore to external names with no underscores. (g77 also appends two underscores to internal names with underscores to avoid naming collisions with external names. The −fno-second-underscore option disables appending of the second underscore in all cases.)

This is done to ensure compatibility with code produced by many UNIX Fortran compilers, including f2c which perform the same transformations.

Use of −fno-underscoring is not recommended unless you are experimenting with issues such as integration of ( GNU ) Fortran into existing system environments (vis-a-vis existing libraries, tools, and so on).

For example, with −funderscoring, and assuming other defaults like −fcase-lower and that j() and max_count() are external functions while my_var and lvar are local variables, a statement like

        I = J() + MAX_COUNT (MY_VAR, LVAR)

is implemented as something akin to:

        i = j_() + max_count__(&my_var__, &lvar);

With −fno-underscoring, the same statement is implemented as:

        i = j() + max_count(&my_var, &lvar);

Use of −fno-underscoring allows direct specification of user-defined names while debugging and when interfacing g77 code with other languages.

Note that just because the names match does not mean that the interface implemented by g77 for an external name matches the interface implemented by some other language for that same name. That is, getting code produced by g77 to link to code produced by some other compiler using this or any other method can be only a small part of the overall solution−−−getting the code generated by both compilers to agree on issues other than naming can require significant effort, and, unlike naming disagreements, linkers normally cannot detect disagreements in these other areas.

Also, note that with −fno-underscoring, the lack of appended underscores introduces the very real possibility that a user-defined external name will conflict with a name in a system library, which could make finding unresolved-reference bugs quite difficult in some cases−−−they might occur at program run time, and show up only as buggy behavior at run time.

In future versions of g77 we hope to improve naming and linking issues so that debugging always involves using the names as they appear in the source, even if the names as seen by the linker are mangled to prevent accidental linking between procedures with incompatible interfaces.

−fno-second-underscore

Do not append a second underscore to names of entities specified in the Fortran source file.

This option has no effect if −fno-underscoring is in effect.

Otherwise, with this option, an external name such as MAX_COUNT is implemented as a reference to the link-time external symbol max_count_, instead of max_count__.

−fno-ident

Ignore the #ident directive.

−fzeros

Treat initial values of zero as if they were any other value.

As of version 0.5.18, g77 normally treats "DATA" and other statements that are used to specify initial values of zero for variables and arrays as if no values were actually specified, in the sense that no diagnostics regarding multiple initializations are produced.

This is done to speed up compiling of programs that initialize large arrays to zeros.

Use −fzeros to revert to the simpler, slower behavior that can catch multiple initializations by keeping track of all initializations, zero or otherwise.

Caution: Future versions of g77 might disregard this option (and its negative form, the default) or interpret it somewhat differently. The interpretation changes will affect only non-standard programs; standard-conforming programs should not be affected.

−femulate-complex

Implement "COMPLEX" arithmetic via emulation, instead of using the facilities of the gcc back end that provide direct support of "complex" arithmetic.

(gcc had some bugs in its back-end support for "complex" arithmetic, due primarily to the support not being completed as of version 2.8.1 and "egcs" 1.1.2.)

Use −femulate-complex if you suspect code-generation bugs, or experience compiler crashes, that might result from g77 using the "COMPLEX" support in the gcc back end. If using that option fixes the bugs or crashes you are seeing, that indicates a likely g77 bugs (though, all compiler crashes are considered bugs), so, please report it. (Note that the known bugs, now believed fixed, produced compiler crashes rather than causing the generation of incorrect code.)

Use of this option should not affect how Fortran code compiled by g77 works in terms of its interfaces to other code, e.g. that compiled by f2c

As of GCC version 3.0, this option is not necessary anymore.

Caution: Future versions of g77 might ignore both forms of this option.

−falias-check
−fargument-alias
−fargument-noalias
−fno-argument-noalias-global

Version info: These options are not supported by versions of g77 based on gcc version 2.8.

These options specify to what degree aliasing (overlap) is permitted between arguments (passed as pointers) and "COMMON" (external, or public) storage.

The default for Fortran code, as mandated by the FORTRAN 77 and Fortran 90 standards, is −fargument-noalias-global. The default for code written in the C language family is −fargument-alias.

Note that, on some systems, compiling with −fforce-addr in effect can produce more optimal code when the default aliasing options are in effect (and when optimization is enabled).

−fno-globals

Disable diagnostics about inter-procedural analysis problems, such as disagreements about the type of a function or a procedure’s argument, that might cause a compiler crash when attempting to inline a reference to a procedure within a program unit. (The diagnostics themselves are still produced, but as warnings, unless −Wno-globals is specified, in which case no relevant diagnostics are produced.)

Further, this option disables such inlining, to avoid compiler crashes resulting from incorrect code that would otherwise be diagnosed.

As such, this option might be quite useful when compiling existing, ’’working’’ code that happens to have a few bugs that do not generally show themselves, but which g77 diagnoses.

Use of this option therefore has the effect of instructing g77 to behave more like it did up through version 0.5.19.1, when it paid little or no attention to disagreements between program units about a procedure’s type and argument information, and when it performed no inlining of procedures (except statement functions).

Without this option, g77 defaults to performing the potentially inlining procedures as it started doing in version 0.5.20, but as of version 0.5.21, it also diagnoses disagreements that might cause such inlining to crash the compiler as (fatal) errors, and warns about similar disagreements that are currently believed to not likely to result in the compiler later crashing or producing incorrect code.

−fflatten-arrays

Use back end’s C-like constructs (pointer plus offset) instead of its "ARRAY_REF" construct to handle all array references.

Note: This option is not supported. It is intended for use only by g77 developers, to evaluate code-generation issues. It might be removed at any time.

−fbounds-check
−ffortran-bounds-check

Enable generation of run-time checks for array subscripts and substring start and end points against the (locally) declared minimum and maximum values.

The current implementation uses the "libf2c" library routine "s_rnge" to print the diagnostic.

However, whereas f2c generates a single check per reference for a multi-dimensional array, of the computed offset against the valid offset range (0 through the size of the array), g77 generates a single check per subscript expression. This catches some cases of potential bugs that f2c does not, such as references to below the beginning of an assumed-size array.

g77 also generates checks for "CHARACTER" substring references, something f2c currently does not do.

Use the new −ffortran-bounds-check option to specify bounds-checking for only the Fortran code you are compiling, not necessarily for code written in other languages.

Note: To provide more detailed information on the offending subscript, g77 provides the "libg2c" run-time library routine "s_rnge" with somewhat differently-formatted information. Here’s a sample diagnostic:

        Subscript out of range on file line 4, procedure rnge.f/bf.
        Attempt to access the -6-th element of variable b[subscript-2-of-2].
        Aborted

The above message indicates that the offending source line is line 4 of the file rnge.f, within the program unit (or statement function) named bf. The offended array is named b. The offended array dimension is the second for a two-dimensional array, and the offending, computed subscript expression was −6.

For a "CHARACTER" substring reference, the second line has this appearance:

        Attempt to access the 11-th element of variable a[start-substring].

This indicates that the offended "CHARACTER" variable or array is named a, the offended substring position is the starting (leftmost) position, and the offending substring expression is 11.

(Though the verbage of "s_rnge" is not ideal for the purpose of the g77 compiler, the above information should provide adequate diagnostic abilities to it users.)

Some of these do not work when compiling programs written in Fortran:
−fpcc-struct-return
−freg-struct-return

You should not use these except strictly the same way as you used them to build the version of "libg2c" with which you will be linking all code compiled by g77 with the same option.

−fshort-double

This probably either has no effect on Fortran programs, or makes them act loopy.

−fno-common

Do not use this when compiling Fortran programs, or there will be Trouble.

−fpack-struct

This probably will break any calls to the "libg2c" library, at the very least, even if it is built with the same option.

ENVIRONMENT

GNU Fortran currently does not make use of any environment variables to control its operation above and beyond those that affect the operation of gcc.

BUGS

For instructions on reporting bugs, see <http://gcc.gnu.org/bugs.html>. Use of the gccbug script to report bugs is recommended.

FOOTNOTES

SEE ALSO

gpl(7), gfdl(7), fsf-funding(7), cpp(1), gcov(1), gcc(1), as(1), ld(1), gdb(1), adb(1), dbx(1), sdb(1) and the Info entries for gcc, cpp, g77, as, ld, binutils and gdb.

AUTHOR

See the Info entry for g77 for contributors to GCC and G77.

COPYRIGHT

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being ’’ GNU General Public License’’ and ’’Funding Free Software’’, the Front-Cover texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the gfdl(7) man page.

(a) The FSF ’s Front-Cover Text is:

     A GNU Manual

(b) The FSF ’s Back-Cover Text is:

     You have freedom to copy and modify this GNU Manual, like GNU
     software.  Copies published by the Free Software Foundation raise
     funds for GNU development.