dmesg − print or control the kernel ring buffer
dmesg −−read−clear [options]
dmesg −−console−level level
dmesg is used to examine or control the kernel ring buffer.
The default action is to display all messages from the kernel ring buffer.
−−console−level options are
Clear the ring buffer.
Clear the ring buffer after first printing its contents.
Disable the printing of messages to the console.
Display the timestamp and the time delta spent between messages. If used together with −−notime then only the time delta without the timestamp is printed.
Enable printing messages to the console.
Display the local time and the delta in human-readable format. Be aware that conversion to the local time could be inaccurate (see −T for more details).
−F, −−file file
Read the syslog messages from the given file. Note that −F does not support messages in kmsg format. The old syslog format is supported only.
−f, −−facility list
Restrict output to the given (comma-separated) list of facilities. For example:
will print messages from system daemons only. For all supported facilities see the −−help output.
Enable human-readable output. See also −−color, −−reltime and −−nopager.
Print kernel messages.
Colorize the output. The optional argument when can be auto, never or always. If the when argument is omitted, it defaults to auto. The colors can be disabled; for the current built-in default see the −−help output. See also the COLORS section below.
−l, −−level list
Restrict output to the given (comma-separated) list of levels. For example:
will print error and warning messages only. For all supported levels see the −−help output.
−n, −−console−level level
Set the level at which printing of messages is done to the console. The level is a level number or abbreviation of the level name. For all supported levels see the −−help output.
For example, −n 1 or −n alert prevents all messages, except emergency (panic) messages, from appearing on the console. All levels of messages are still written to /proc/kmsg, so syslogd(8) can still be used to control exactly where kernel messages appear. When the −n option is used, dmesg will not print or clear the kernel ring buffer.
Do not pipe output into a pager. A pager is enabled by default for −−human output.
Add facility, level or timestamp information to each line of a multi-line message.
Print the raw message buffer, i.e. do not strip the log-level prefixes.
Note that the real raw format depends on the method how dmesg(1) reads kernel messages. The /dev/kmsg device uses a different format than syslog(2). For backward compatibility, dmesg(1) returns data always in the syslog(2) format. It is possible to read the real raw data from /dev/kmsg by, for example, the command ’dd if=/dev/kmsg iflag=nonblock’.
−s, −−buffer−size size
Use a buffer of size to query the kernel ring buffer. This is 16392 by default. (The default kernel syslog buffer size was 4096 at first, 8192 since 1.3.54, 16384 since 2.1.113.) If you have set the kernel buffer to be larger than the default, then this option can be used to view the entire buffer.
Print human-readable timestamps.
Be aware that the timestamp could be inaccurate! The time source used for the logs is not updated after system SUSPEND/RESUME.
Do not print kernel’s timestamps.
Print timestamps using the given format, which can be ctime, reltime, delta or iso. The first three formats are aliases of the time-format-specific options. The iso format is a dmesg implementation of the ISO-8601 timestamp format. The purpose of this format is to make the comparing of timestamps between two systems, and any other parsing, easy. The definition of the iso timestamp is: YYYY-MM-DD<T>HH:MM:SS,<microseconds><-+><timezone offset from UTC>.
The iso format has the same issue as ctime: the time may be inaccurate when a system is suspended and resumed.
Print userspace messages.
Wait for new messages. This feature is supported only on systems with a readable /dev/kmsg (since kernel 3.5.0).
Decode facility and level (priority) numbers to human-readable prefixes.
Display version information and exit.
Display help text and exit.
Implicit coloring can be disabled by an empty file /etc/terminal-colors.d/dmesg.disable. See terminal-colors.d(5) for more details about colorization configuration.
The logical color names supported by dmesg are:
The message sub-system prefix (e.g. "ACPI:").
The message timestamp.
The message timestamp in short ctime format in −−reltime or −−human output.
The text of the message with the alert log priority.
The text of the message with the critical log priority.
The text of the message with the error log priority.
The text of the message with the warning log priority.
The text of the message that inform about segmentation fault.
dmesg can fail reporting permission denied error. This is usually caused by dmesg_restrict kernel setting, please see syslog(2) for more details.
kzak [AT] redhat.com">Karel Zak
dmesg was originally written by tytso [AT] athena.edu">Theodore Ts’o
The dmesg command is part of the util-linux package and is available from https://www.kernel.org/pub/linux/utils/util-linux/">Linux Kernel Archive.