NAME
dhcpcd-run-hooks — DHCP client configuration script
DESCRIPTION
dhcpcd-run-hooks is used by dhcpcd(8) to run any system and user defined hook scripts. System hook scripts are found in /usr/lib/dhcpcd/dhcpcd-hooks and the user defined hooks are /etc/dhcpcd.enter-hook. and /etc/dhcpcd.exit-hook. The default install supplies hook scripts for configuring /etc/resolv.conf and the hostname. Your distribution may have included other hook scripts to say configure ntp or ypbind. A test hook is also supplied that simply echos the dhcp variables to the console from DISCOVER message.
The hooks scripts are loaded into the current shell rather than executed in their own process. This allows each hook script, such as /etc/dhcpcd.enter-hook to customise environment variables or provide alternative functions to hooks further down the chain. As such, using the shell builtins exit, exec or similar will cause dhcpcd-run-hooks to exit at that point.
Each time dhcpcd-run-hooks is invoked, $interface is set to the interface that dhcpcd is run on and $reason is set to the reason why dhcpcd-run-hooks was invoked. DHCP information to be configured is held in variables starting with the word new_ and old DHCP information to be removed is held in variables starting with the word old_. dhcpcd can display the full list of variables it knows about by using the -V, --variables argument.
Here’s a list of reasons why dhcpcd-run-hooks could be invoked:
PREINIT
dhcpcd is starting up and any pre-initialisation required should be performed now.
CARRIER
dhcpcd has detected the carrier is up. This is generally just a notification and no action need be taken.
NOCARRIER
dhcpcd lost the carrier. The cable may have been unplugged or association to the wireless point lost.
NOCARRIER_ROAMING
dhcpcd lost the carrier but the interface configuration is persisted. The OS has to support wireless roaming or IP Persistence for this to happen.
INFORM | INFORM6
dhcpcd informed a DHCP server about its address and obtained other configuration details.
BOUND | BOUND6
dhcpcd obtained a new lease from a DHCP server.
RENEW | RENEW6
dhcpcd renewed its lease.
REBIND | REBIND6
dhcpcd has rebound to a new DHCP server.
REBOOT | REBOOT6
dhcpcd successfully requested a lease from a DHCP server.
DELEGATED6
dhcpcd assigned a delegated prefix to the interface.
IPV4LL
dhcpcd obtained an IPV4LL address, or one was removed.
STATIC
dhcpcd has been configured with a static configuration which has not been obtained from a DHCP server.
3RDPARTY
dhcpcd is monitoring the interface for a 3rd party to give it an IP address.
TIMEOUT
dhcpcd failed to contact any DHCP servers but was able to use an old lease.
EXPIRE | EXPIRE6
dhcpcd’s lease or state expired and it failed to obtain a new one.
NAK
dhcpcd received a NAK from the DHCP server. This should be treated as EXPIRE.
RECONFIGURE
dhcpcd has been instructed to reconfigure an interface.
ROUTERADVERT
dhcpcd has received an IPv6 Router Advertisement, or one has expired.
STOP | STOP6
dhcpcd stopped running on the interface.
STOPPED
dhcpcd has stopped entirely.
DEPARTED
The interface has been removed.
FAIL
dhcpcd failed to operate on the interface. This normally happens when dhcpcd does not support the raw interface, which means it cannot work as a DHCP or ZeroConf client. Static configuration and DHCP INFORM is still allowed.
TEST
dhcpcd received an OFFER from a DHCP server but will not configure the interface. This is primarily used to test the variables are filled correctly for the script to process them.
ENVIRONMENT
dhcpcd will clear the environment variables aside from $PATH. The following variables will then be set, along with any protocol supplied ones.
$interface
the name of the interface.
$protocol
the protocol that triggered the event.
$reason
as described above.
$pid
the pid of dhcpcd.
$ifcarrier
the link status of $interface: unknown, up or down.
$ifmetric
$interface preference, lower is better.
$ifwireless
1 if $interface is wireless, otherwise 0.
$ifflags
$interface flags.
$ifmtu
$interface MTU.
$ifssid
the SSID the interface is connected to.
$interface_order
A list of interfaces, in order of preference.
$if_up
true if the interface is up, otherwise false. This is more than IFF_UP and may not be equal.
$if_down
true if the interface is down, otherwise false. This is more than IFF_UP and may not be equal.
$af_waiting
Address family waiting for, as defined in dhcpcd.conf(5).
$profile
the name of the profile selected from dhcpcd.conf(5).
$new_delegated_dhcp6_prefix
space-separated list of delegated prefixes.
FILES
When dhcpcd-run-hooks runs, it loads /etc/dhcpcd.enter-hook, any scripts found in /usr/lib/dhcpcd/dhcpcd-hooks in lexical order, then finally /etc/dhcpcd.exit-hook.
SEE ALSO
AUTHORS
Roy Marples <roy [AT] marples.name>
BUGS
Please report them to https://roy.marples.name/projects/dhcpcd
SECURITY CONSIDERATIONS
dhcpcd will validate the content of each option against its encoding. For string, ascii, raw or binhex encoding it’s up to the user to validate it for the intended purpose.
When used in a shell script, each variable must be quoted correctly.
BSD August 31, 2022 BSD