Manpages

NAME

crypto — API for cryptographic services in the kernel

SYNOPSIS

#include <opencrypto/cryptodev.h>

int32_t

crypto_get_driverid(device_t, size_t, int);

int

crypto_register(uint32_t, int, uint16_t, uint32_t, int (*)(void *, uint32_t *, struct cryptoini *), int (*)(void *, uint64_t), int (*)(void *, struct cryptop *), void *);

int

crypto_kregister(uint32_t, int, uint32_t, int (*)(void *, struct cryptkop *), void *);

int

crypto_unregister(uint32_t, int);

int

crypto_unregister_all(uint32_t);

void

crypto_done(struct cryptop *);

void

crypto_kdone(struct cryptkop *);

int

crypto_find_driver(const char *);

int

crypto_newsession(crypto_session_t *, struct cryptoini *, int);

int

crypto_freesession(crypto_session_t);

int

crypto_dispatch(struct cryptop *);

int

crypto_kdispatch(struct cryptkop *);

int

crypto_unblock(uint32_t, int);

struct cryptop *

crypto_getreq(int);

void

crypto_freereq(void);

#define EALG_MAX_BLOCK_LEN 16

struct cryptoini {

};

struct cryptodesc {

#define crd_iv CRD_INI.cri_iv
#define crd_key CRD_INI.cri_key
#define crd_alg CRD_INI.cri_alg
#define crd_klen CRD_INI.cri_klen

};

struct cryptop {

};

struct crparam {
caddr_t crp_p;
u_int crp_nbits;
};

#define CRK_MAXPARAM 8

struct cryptkop {
TAILQ_ENTRY(cryptkop) krp_next;
u_int krp_op; /* ie. CRK_MOD_EXP or other */
u_int krp_status; /* return status */
u_short krp_iparams; /* # of input parameters */
u_short krp_oparams; /* # of output parameters */
uint32_t krp_hid;
struct crparam krp_param[CRK_MAXPARAM];
int (*krp_callback)(struct cryptkop *);
};

DESCRIPTION

crypto is a framework for drivers of cryptographic hardware to register with the kernel so ’’consumers’’ (other kernel subsystems, and users through the /dev/crypto device) are able to make use of it. Drivers register with the framework the algorithms they support, and provide entry points (functions) the framework may call to establish, use, and tear down sessions. Sessions are used to cache cryptographic information in a particular driver (or associated hardware), so initialization is not needed with every request. Consumers of cryptographic services pass a set of descriptors that instruct the framework (and the drivers registered with it) of the operations that should be applied on the data (more than one cryptographic operation can be requested).

Keying operations are supported as well. Unlike the symmetric operators described above, these sessionless commands perform mathematical operations using input and output parameters.

Since the consumers may not be associated with a process, drivers may not sleep(9). The same holds for the framework. Thus, a callback mechanism is used to notify a consumer that a request has been completed (the callback is specified by the consumer on a per-request basis). The callback is invoked by the framework whether the request was successfully completed or not. An error indication is provided in the latter case. A specific error code, EAGAIN, is used to indicate that a session handle has changed and that the request may be re-submitted immediately with the new session. Errors are only returned to the invoking function if not enough information to call the callback is available (meaning, there was a fatal error in verifying the arguments). For session initialization and teardown no callback mechanism is used.

The crypto_find_driver() function may be called to return the specific id of the provided name. If the specified driver could not be found, the returned id is -1.

The crypto_newsession() routine is called by consumers of cryptographic services (such as the ipsec(4) stack) that wish to establish a new session with the framework. The second argument contains all the necessary information for the driver to establish the session. The third argument is either a specific driver id, or one or both of CRYPTOCAP_F_HARDWARE, to select hardware devices, or CRYPTOCAP_F_SOFTWARE, to select software devices. If both are specified, a hardware device will be returned before a software device will be. On success, the value pointed to by the first argument will be the opaque session handle. The various fields in the cryptoini structure are:

cri_alg

Contains an algorithm identifier. Currently supported algorithms are:

CRYPTO_AES_128_NIST_GMAC
CRYPTO_AES_192_NIST_GMAC
CRYPTO_AES_256_NIST_GMAC
CRYPTO_AES_CBC
CRYPTO_AES_ICM
CRYPTO_AES_NIST_GCM_16
CRYPTO_AES_NIST_GMAC
CRYPTO_AES_XTS
CRYPTO_ARC4
CRYPTO_BLF_CBC
CRYPTO_CAMELLIA_CBC
CRYPTO_CAST_CBC
CRYPTO_DEFLATE_COMP
CRYPTO_DES_CBC
CRYPTO_3DES_CBC
CRYPTO_MD5
CRYPTO_MD5_HMAC
CRYPTO_MD5_KPDK
CRYPTO_NULL_HMAC
CRYPTO_NULL_CBC
CRYPTO_RIPEMD160_HMAC
CRYPTO_SHA1
CRYPTO_SHA1_HMAC
CRYPTO_SHA1_KPDK
CRYPTO_SHA2_256_HMAC
CRYPTO_SHA2_384_HMAC
CRYPTO_SHA2_512_HMAC
CRYPTO_SKIPJACK_CBC
cri_klen

Specifies the length of the key in bits, for variable-size key algorithms.

cri_mlen

Specifies how many bytes from the calculated hash should be copied back. 0 means entire hash.

cri_key

Contains the key to be used with the algorithm.

cri_iv

Contains an explicit initialization vector (IV), if it does not prefix the data. This field is ignored during initialization (crypto_newsession). If no IV is explicitly passed (see below on details), a random IV is used by the device driver processing the request.

cri_next

Contains a pointer to another cryptoini structure. Multiple such structures may be linked to establish multi-algorithm sessions (ipsec(4) is an example consumer of such a feature).

The cryptoini structure and its contents will not be modified by the framework (or the drivers used).

crypto_freesession() is called with the session handle returned by crypto_newsession() to free the session.

crypto_dispatch() is called to process a request. The various fields in the cryptop structure are:

crp_session

Contains the session handle.

crp_ilen

Indicates the total length in bytes of the buffer to be processed.

crp_olen

On return, contains the total length of the result. For symmetric crypto operations, this will be the same as the input length. This will be used if the framework needs to allocate a new buffer for the result (or for re-formatting the input).

crp_callback

This routine is invoked upon completion of the request, whether successful or not. It is invoked through the crypto_done() routine. If the request was not successful, an error code is set in the crp_etype field. It is the responsibility of the callback routine to set the appropriate spl(9) level.

crp_etype

Contains the error type, if any errors were encountered, or zero if the request was successfully processed. If the EAGAIN error code is returned, the session handle has changed (and has been recorded in the crp_session field). The consumer should record the new session handle and use it in all subsequent requests. In this case, the request may be re-submitted immediately. This mechanism is used by the framework to perform session migration (move a session from one driver to another, because of availability, performance, or other considerations).

Note that this field only makes sense when examined by the callback routine specified in crp_callback. Errors are returned to the invoker of crypto_process() only when enough information is not present to call the callback routine (i.e., if the pointer passed is NULL or if no callback routine was specified).

crp_flags

Is a bitmask of flags associated with this request. Currently defined flags are:

CRYPTO_F_IMBUF

The buffer pointed to by crp_buf is an mbuf chain.

CRYPTO_F_IOV

The buffer pointed to by crp_buf is an uio structure.

CRYPTO_F_BATCH

Batch operation if possible.

CRYPTO_F_CBIMM

Do callback immediately instead of doing it from a dedicated kernel thread.

CRYPTO_F_DONE

Operation completed.

CRYPTO_F_CBIFSYNC

Do callback immediately if operation is synchronous (that the driver specified the CRYPTOCAP_F_SYNC flag).

CRYPTO_F_ASYNC

Try to do the crypto operation in a pool of workers if the operation is synchronous (that is, if the driver specified the CRYPTOCAP_F_SYNC flag). It aims to speed up processing by dispatching crypto operations on different processors.

CRYPTO_F_ASYNC_KEEPORDER

Dispatch callbacks in the same order they are posted. Only relevant if the CRYPTO_F_ASYNC flag is set and if the operation is synchronous.

crp_buf

Points to the input buffer. On return (when the callback is invoked), it contains the result of the request. The input buffer may be an mbuf chain or a contiguous buffer, depending on crp_flags.

crp_opaque

This is passed through the crypto framework untouched and is intended for the invoking application’s use.

crp_desc

This is a linked list of descriptors. Each descriptor provides information about what type of cryptographic operation should be done on the input buffer. The various fields are:

crd_iv

When the flag CRD_F_IV_EXPLICIT is set, this field contains the IV.

crd_key

When the CRD_F_KEY_EXPLICIT flag is set, the crd_key points to a buffer with encryption or authentication key.

crd_alg

An algorithm to use. Must be the same as the one given at newsession time.

crd_klen

The crd_key key length.

crd_skip

The offset in the input buffer where processing should start.

crd_len

How many bytes, after crd_skip, should be processed.

crd_inject

The crd_inject field specifies an offset in bytes from the beginning of the buffer. For encryption algorithms, this may be where the IV will be inserted when encrypting or where the IV may be found for decryption (subject to crd_flags). For MAC algorithms, this is where the result of the keyed hash will be inserted.

crd_flags

The following flags are defined:

CRD_F_ENCRYPT

For encryption algorithms, this bit is set when encryption is required (when not set, decryption is performed).

CRD_F_IV_PRESENT

For encryption, if this bit is not set the IV used to encrypt the packet will be written at the location pointed to by crd_inject. The IV length is assumed to be equal to the blocksize of the encryption algorithm. For encryption, if this bit is set, nothing is done. For decryption, this flag has no meaning. Applications that do special ’’IV cooking’’, such as the half-IV mode in ipsec(4), can use this flag to indicate that the IV should not be written on the packet. This flag is typically used in conjunction with the CRD_F_IV_EXPLICIT flag.

CRD_F_IV_EXPLICIT

This bit is set when the IV is explicitly provided by the consumer in the crd_iv field. Otherwise, for encryption operations the IV is provided for by the driver used to perform the operation, whereas for decryption operations the offset of the IV is provided by the crd_inject field. This flag is typically used when the IV is calculated ’’on the fly’’ by the consumer, and does not precede the data (some ipsec(4) configurations, and the encrypted swap are two such examples).

CRD_F_KEY_EXPLICIT

For encryption and authentication (MAC) algorithms, this bit is set when the key is explicitly provided by the consumer in the crd_key field for the given operation. Otherwise, the key is taken at newsession time from the cri_key field. As calculating the key schedule may take a while, it is recommended that often used keys are given their own session.

CRD_F_COMP

For compression algorithms, this bit is set when compression is required (when not set, decompression is performed).

CRD_INI

This cryptoini structure will not be modified by the framework or the device drivers. Since this information accompanies every cryptographic operation request, drivers may re-initialize state on-demand (typically an expensive operation). Furthermore, the cryptographic framework may re-route requests as a result of full queues or hardware failure, as described above.

crd_next

Point to the next descriptor. Linked operations are useful in protocols such as ipsec(4), where multiple cryptographic transforms may be applied on the same block of data.

crypto_getreq() allocates a cryptop structure with a linked list of as many cryptodesc structures as were specified in the argument passed to it.

crypto_freereq() deallocates a structure cryptop and any cryptodesc structures linked to it. Note that it is the responsibility of the callback routine to do the necessary cleanups associated with the opaque field in the cryptop structure.

crypto_kdispatch() is called to perform a keying operation. The various fields in the cryptkop structure are:

krp_op

Operation code, such as CRK_MOD_EXP.

krp_status

Return code. This errno-style variable indicates whether lower level reasons for operation failure.

krp_iparams

Number if input parameters to the specified operation. Note that each operation has a (typically hardwired) number of such parameters.

krp_oparams

Number if output parameters from the specified operation. Note that each operation has a (typically hardwired) number of such parameters.

krp_kvp

An array of kernel memory blocks containing the parameters.

krp_hid

Identifier specifying which low-level driver is being used.

krp_callback

Callback called on completion of a keying operation.

DRIVER-SIDE API

The crypto_get_driverid(), crypto_get_driver_session(), crypto_register(), crypto_kregister(), crypto_unregister(), crypto_unblock(), and crypto_done() routines are used by drivers that provide support for cryptographic primitives to register and unregister with the kernel crypto services framework.

Drivers must first use the crypto_get_driverid() function to acquire a driver identifier, specifying the flags as an argument. One of CRYPTOCAP_F_SOFTWARE or CRYPTOCAP_F_HARDWARE must be specified. The CRYPTOCAP_F_SYNC may also be specified, and should be specified if the driver does all of it’s operations synchronously. Drivers must pass the size of their session struct as the second argument. An appropriately sized memory will be allocated by the framework, zeroed, and passed to the driver’s newsession() method.

For each algorithm the driver supports, it must then call crypto_register(). The first two arguments are the driver and algorithm identifiers. The next two arguments specify the largest possible operator length (in bits, important for public key operations) and flags for this algorithm. The last four arguments must be provided in the first call to crypto_register() and are ignored in all subsequent calls. They are pointers to three driver-provided functions that the framework may call to establish new cryptographic context with the driver, free already established context, and ask for a request to be processed (encrypt, decrypt, etc.); and an opaque parameter to pass when calling each of these routines.

crypto_unregister() is called by drivers that wish to withdraw support for an algorithm. The two arguments are the driver and algorithm identifiers, respectively. Typically, drivers for PCMCIA crypto cards that are being ejected will invoke this routine for all algorithms supported by the card. crypto_unregister_all() will unregister all algorithms registered by a driver and the driver will be disabled (no new sessions will be allocated on that driver, and any existing sessions will be migrated to other drivers). The same will be done if all algorithms associated with a driver are unregistered one by one. After a call to crypto_unregister_all() there will be no threads in either the newsession or freesession function of the driver.

The calling convention for the driver-supplied routines are:

int (*newsession)(device_t, crypto_session_t, struct cryptoini *);
void (*freesession)(device_t, crypto_session_t);
int (*process)(device_t, struct cryptop *, int);
int (*kprocess)(device_t, struct cryptkop *, int);

On invocation, the first argument to all routines is the device_t that was provided to crypto_get_driverid(). The second argument to newsession() is the opaque session handle for the new session. The third argument is identical to that of crypto_newsession().

Drivers obtain a pointer to their session memory by invoking crypto_get_driver_session() on the opaque crypto_session_t handle.

The freesession() routine takes as arguments the opaque data value and the session handle. It should clear any context associated with the session (clear hardware registers, memory, etc.). If no resources need to be released other than the contents of session memory, the method is optional. The crypto framework will zero and release the allocated session memory (after running the freesession() method, if one exists).

The process() routine is invoked with a request to perform crypto processing. This routine must not block or sleep, but should queue the request and return immediately or process the request to completion. In case of an unrecoverable error, the error indication must be placed in the crp_etype field of the cryptop structure. When the request is completed, or an error is detected, the process() routine must invoke crypto_done(). Session migration may be performed, as mentioned previously.

In case of a temporary resource exhaustion, the process() routine may return ERESTART in which case the crypto services will requeue the request, mark the driver as ’’blocked’’, and stop submitting requests for processing. The driver is then responsible for notifying the crypto services when it is again able to process requests through the crypto_unblock() routine. This simple flow control mechanism should only be used for short-lived resource exhaustion as it causes operations to be queued in the crypto layer. Doing so is preferable to returning an error in such cases as it can cause network protocols to degrade performance by treating the failure much like a lost packet.

The kprocess() routine is invoked with a request to perform crypto key processing. This routine must not block, but should queue the request and return immediately. Upon processing the request, the callback routine should be invoked. In case of an unrecoverable error, the error indication must be placed in the krp_status field of the cryptkop structure. When the request is completed, or an error is detected, the kprocess() routine should invoked crypto_kdone().

RETURN VALUES

crypto_register(), crypto_kregister(), crypto_unregister(), crypto_newsession(), crypto_freesession(), and crypto_unblock() return 0 on success, or an error code on failure. crypto_get_driverid() returns a non-negative value on error, and −1 on failure. crypto_getreq() returns a pointer to a cryptop structure and NULL on failure. crypto_dispatch() returns EINVAL if its argument or the callback function was NULL, and 0 otherwise. The callback is provided with an error code in case of failure, in the crp_etype field.

FILES
sys/opencrypto/crypto.c

most of the framework code

SEE ALSO

crypto(4), ipsec(4), crypto(7), malloc(9), sleep(9)

HISTORY

The cryptographic framework first appeared in OpenBSD 2.7 and was written by Angelos D. Keromytis <angelos [AT] openbsd.org>.

BUGS

The framework currently assumes that all the algorithms in a crypto_newsession() operation must be available by the same driver. If that is not the case, session initialization will fail.

The framework also needs a mechanism for determining which driver is best for a specific set of algorithms associated with a session. Some type of benchmarking is in order here.

Multiple instances of the same algorithm in the same session are not supported.

BSD July 17, 2018 BSD