NAME
axparms - Configure AX.25 interfaces.
SYNOPSIS
axparms --assoc|--forward|--route|--setcall|--version ...
DESCRIPTION
The axparms command is designed to be a multi-function command that allows miscellaneous commands to be issued to the Linux AX.25 protocol layer. The different modes of the command are chosen by the first argument. Subsequent arguments depend upon this argument and so no generalised command format can be given.
--assoc Argument
The format of this option is:
axparms
--assoc <callsign> <username|uid>
axparms --assoc <callsign> delete
axparms --assoc policy [default|deny]
axparms --assoc show
This option manipulates the kernel uid/callsign mapping table, allowing callsigns to be associated and dis-associated with a user. The policy option permits the superuser to have all other uid’s either default to the actual port name, or to block traffic.
At power up the table is blank and the policy is ’default’, which is thus backward compatible.
--forward Argument
Allows the use of many receivers with one transmitter, known as packet forwarding in many systems. The format of this command is:
axparms
--forward <portfrom> <portto>
axparms --forward <portfrom> delete
Any packets to be transmitted on port portfrom will be transmitted on port portto. This will stay in force until the second form of the command is issued which will remove the association.
--route Argument
This option allows the internal AX.25 routing table to be manipulated. This table is available for reading in /proc/net/ax25_route, and will be built up dynamically by stations heard. However it is possible to add, delete and list entries via this option.
The formats of this option are:
axparms
--route add <port> <callsign> [<digis>]
[--ipmode V|D]
axparms --route del <port> <callsign>
axparms --route list
Routes added via this command will not be removed from the internal routing table when they are “old” as normal entries are. The --ipmode option sets mode vc or mode datagram for this destination.
If the <callsign> argument is set to “default” then this will set the default route for all outgoing AX.25 connections which will be used when there is no specific route to the required destination.
--setcall Argument
The format of this option is:
axparms --setcall <interface> <callsign>
This changes the callsign associated at the given physical ax25 interface.
Cave: The interface name is not the symbolic port name from axports, but the real interface name (from ifconfig(8)): ax0, ax1, .., sp0, .., bpq0, ... etc..
The change is permanent as long as the interface exists, or another “axparms --setcall” is issued.
The interface has to exist already in order to use this option; it may be in state UP or DOWN.
--version Argument
This option displays the version of the AX.25 utilities that axparms belongs to.
FILES
/proc/net/bpqether
/proc/net/ax25_calls
/etc/ax25/axports
SEE ALSO
call(1), getsockopt(2), setsockopt(2), ax25(4), axctl(8), axports(5).
AUTHORS
Alan Cox GW4PTS
<alan [AT] cymru.net>
Jonathan Naylor G4KLX <g4klx [AT] g4klx.uk>
Joerg Reuter DL1BKE <jreuter [AT] poboxes.com>