NAME
dahdi_cfg - configures DAHDI kernel modules from /etc/dahdi/system.conf
SYNOPSIS
dahdi_cfg [-c CFG_FILE] [-SNUM [-SCHANS]] [-s] [-f] [-t] [-v [-v ... ] ]
dahdi_cfg -h
DESCRIPTION
dahdi_cfg configures DAHDI interface cards from a config file.
You generally need to run it with a valid configurations in order for DAHDI modules to work properly.
It must be run to configure every DAHDI span. Normally it is run from the DAHDI init script.
OPTIONS
-c CFG_FILE
Use an alternative configuration file instead of /etc/dahdi/system.conf
If CFG_FILE is ’-’, it is read from stdin.
-C CHANNELS
Only apply changes to channels in the specified range. Only applicable when -S is in use.
-s
Only shutdown spans.
-S SPAN
Only apply changes to span no. SPAN. You also need to specify the range of channels in the span explicitly with -C.
-f
Always configure every channel, even if it appears not to have changed.
-t
Test mode. Don’t do anything, just report what you wanted to do.
-v
Be more verbose. Add extra v-s for extra verbosity.
-h
Display a brief help message.
FILES
/etc/dahdi/system.conf
The default location for the configuration file.
SEE ALSO
dahdi_tool(8), dahdi_monitor(8), asterisk(8).
AUTHOR
This manual page was written by Santiago Ruano Rincón <santiago [AT] unicauca.co> for the Debian system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.