Manpages

NAME

most - browse or page through a text file

SYNOPSIS

most [ -1 ] [ -b ] [ -C ] [ -c ] [ -d ] [ -M ] [ -r ] [ -s ] [ -t ] [ -u ] [ -v ] [ -w ] [ -z ] [ +/string ] [ +line-number ] [ +d ] [ +s ] [ +u ] [ file... ]

DESCRIPTION

most is a paging program that displays, one windowful at a time, the contents of a file on a terminal. It pauses after each windowful and prints on the window status line the screen the file name, current line number, and the percentage of the file so far displayed.

Unlike other paging programs, most is capable of displaying an arbitrary number of windows as long as each window occupies at least two screen lines. Each window may contain the same file or a different file. In addition, each window has its own mode. For example, one window may display a file with its lines wrapped while another may be truncating the lines. Windows may be ’locked’ together in the sense that if one of the locked windows scrolls, all locked windows will scroll. most is also capable of ignoring lines that are indented beyond a user specified value. This is useful when viewing computer programs to pick out gross features of the code. See the ’:o’ command for a description of this feature.

In addition to displaying ordinary text files, most can also display binary files as well as files with arbitrary ascii characters. When a file is read into a buffer, most examines the first 32 bytes of the file to determine if the file is a binary file and then switches to the appropriate mode. However, this feature may be disabled with the -k option. See the description of the -b, -k, -v, and -t options for further details.

Text files may contain combinations of underscore and backspace characters causing a printer to underline or overstrike. When most recognizes this, it inserts the appropriate escape sequences to achieve the desired effect. In addition, some files cause the printer to overstrike some characters by embedding carriage return characters in the middle of a line. When this occurs, most displays the overstruck character with a bold attribute. This feature facilitates the reading of UNIX man pages or a document produced by runoff. In particular, viewing this document with most should illustrate this behavior provided that the underline characters have not been stripped. This may be turned off with the -v option.

By default, lines with more characters than the terminal width are not wrapped but are instead truncated. When truncation occurs, this is indicated by a ’$’ in the far right column of the terminal screen. The RIGHT and LEFT arrow keys may be used to view lines which extend past the margins of the screen. The -w option may be used to override this feature. When a window is wrapped, the character ’\’ will appear at the right edge of the window.

Commands are listed below.

COLOR SUPPORT

most has supported both 256-color and 24 bit truecolor terminals since version 5.2. Not all terminals are capable of generating arbitrary 24 bit colors. If your terminal supports 24 bit colors, but most does not detect it, then set the environment variable

COLORTERM=truecolor

to force 24 bit truecolors to be used.

OPTIONS

01000000 40001575 9C23A020 4000168D ....@..u.#. @...

When used with the -v option, the same line looks like:

^A^@^@^@ @^@^U u 9C #A0 @^@^V8D ....@..u.#. @...

+/string

Start up at the line containing the first occurrence of string

+lineno

Start up at the specified line-number

COMMAND USAGE

The commands take effect immediately; it is not necessary to type a carriage return. In the following commands, i is a numerical argument (1 by default).
SPACE, CTRL-D, NEXT_SCREEN

Display another windowful, or jump i windowfuls if i is specified.

RETURN, DOWN_ARROW, V, CTRL-N

Display another line, or i more lines, if specified.

UP_ARROW, ^, CTRL-P

Display previous line, or i previous lines, if specified.

T, ESCAPE<

Move to top of buffer.

B, ESCAPE>

Move to bottom of buffer.

RIGHT_ARROW, TAB, >

Scroll window left 60i columns to view lines that are beyond the right margin of the window.

LEFT_ARROW, CTRL-B, <

Scroll window right 60i columns to view lines that are beyond the left margin of the window.

U, CTRL-U, DELETE, PREV_SCREEN

Skip back i windowfuls and then print a windowful.

R, CTRL-R

Redraw the window.

Q, CTRL-X CTRL-C, CTRL-K E

Exit from most. On VMS, ^Z also exits.

h, CTRL-H, HELP, PF2

Help. Give a description of all the most commands. The most environment variable MOST_HELP must be set for this to be meaningful.

f, /, CTRL-F, FIND, GOLD PF3

Prompt for a string and search forward from the current line for ith distinct line containing the string. CTRL-G aborts.

m, SELECT, CTRL-@, CTRL-K M, PERIOD

Set a mark on the current line for later reference.

INSERT_HERE, CTRL-X CTRL-X, COMMA, CTRL-K RETURN, GOLD PERIOD

Set a mark on the current line but return to previous mark. This allows the user to toggle back and forth between two positions in the file.

CTRL-X 2, CTRL-W 2, GOLD X

Split this window in half.

CTRL-X o, CTRL-W o, o, GOLDUP, GOLDDOWN

Move to other window.

CTRL-X 0, CTRL-W 0, GOLD V

Delete this window.

CTRL-X 1, CTRL-W 1, GOLD O

Delete all other windows, leaving only one window.

$, ESC $

This is system dependent. On VMS, this causes most to spawn a subprocess. When the user exits the process, most is resumed. On UNIX systems, most simply suspends itself.

The ’d’ option must be used with a prefix integer i. All lines indented beyond i columns will not be displayed. For example, consider the fragment:

{
int i;
for (i = 0; i < argc, i++)
{
fprintf(stdout,"%i: %s\n",i,argv[i]);
}
return 0;
}
The key sequence ’1:od’ will cause most to display the file ignoring all lines indented beyond the first column. So for the example above, most would display:

int main(int argc, char **argv)...
}
where the ’...’ indicates lines that follow are not displayed.

HINTS

CTRL-G aborts the commands requiring the user to type something in at a prompt. The back-quote key has a special meaning here. It is used to quote certain characters. This is useful when search for the occurrence of a string with a control character or a string at the beginning of a line. In the latter case, to find the occurrence of ’The’ at the beginning of a line, enter ’^JThe where ’ quotes the CTRL-J.

ENVIRONMENT

most uses the following environment variables:
MOST_SWITCHES

This variable sets commonly used switches. For example, some people prefer to use most with the -s option so that excess blank lines are not displayed. On VMS this is normally done done in the login.com through the line:

MOST_EDITOR, SLANG_EDITOR

Either of these environment variables specify an editor for most to invoke to edit a file. The value can contain %s and %d formatting descriptors that represent the file name and line number, respectively. For example, if JED is your editor, then set MOST_EDITOR to ’jed %s -g %d’.

MOST_HELP

This variable may be used to specify an alternate help file.

MOST_INITFILE

Set this variable to specify the initialization file to load during startup. The default action is to load the system configuration file and then a personal configuration file called .mostrc on Unix, and most.rc on other systems.

CONFIGURATION FILE SYNTAX

When most starts up, it tries to read a system configuration file and then a personal configuration file. These files may be used to specify key-bindings and colors.

To bind a key to a particular function use the syntax:

setkey function-name key-sequence

The setkey command requires two arguments. The function-name argument specifies the function that is to be executed as a response to the keys specified by the key-sequence argument are pressed. For example,

setkey "up" "^P"

indicates that when Ctrl-P is pressed then the function up is to be executed.

Sometimes, it is necessary to first unbind a key-sequence before rebinding it in order via the unsetkey function:

unsetkey "^F"

Colors may be defined through the use of the color keyword in the the configuration file using the syntax:

color OBJECT-NAME FOREGROUND-COLOR BACKGROUND-COLOR

Here, OBJECT-NAME can be any one of the following items:

status -- the status line
underline -- underlined text
overstrike -- overstruck text
normal -- anything else

See the sample configuration files for more information.

BUGS

Almost all of the known bugs or limitations of most are due to a desire to read and interpret control characters in files. One problem concerns the use of backspace characters to underscore or overstrike other characters. most makes an attempt to use terminal escape sequences to simulate this behavior. One side effect is the one does not always get what one expects when scrolling right and left through a file. When in doubt, use the -v and -b options of most.

The regular-expression searches may fail to find strings that involve backspace/underscore used for highlighting. The regular-expression syntax is described in the S-Lang Library documentation.

AUTHOR

John E. Davis <jed [AT] jedsoft.org>

ACKNOWLEDGEMENTS

Over the years, many people have contributed to most in one way or another, e.g., via code patches, bug-fixes, comments, or criticisms. I am particularly grateful to the very early adopters of the program who took a chance with a fledgling software project headed by someone learning the underlying language. These include:

Mats Akerberg, Henk D. Davids, Rex O. Livingston, and Mark Pizzolato contributed to the early VMS versions of most. In particular, Mark worked on it to get it ready for DECUS.

Foteos Macrides adapted most for use in cswing and gopher. A few features of the present version of most was inspired from his work.

I am grateful to Robert Mills for re-writing the search routines to use regular expressions.

Sven Oliver Moll came up with the idea of automatic detection of zipped files.

I would also like to thank Shinichi Hama for his valuable criticisms of most.

Javier Kohen was instrumental in the support for UTF-8.

Thanks to David W. Sanderson for adapting the early documentation to nroff man page source format.